#!/usr/bin/env bash

#DESC Harden system per pa-dss4.0 recommendations.
#HELP command to generate this file:
#HELP oscap xccdf generate fix --profile pci-dss /usr/share/xml/scap/ssg/content/ssg-rhel9-ds.xml > padss4_harden

#install or update deps
yum -y openscap

#fix authselect
authselect select minimal --force

#fix usr2 perms
chown -R root:root /usr2/basis
/usr2/bbx/bin/rtiperms.pl /usr2/bbx

#scare message
echo "+----------------------------------------------------+
| This is a controlled access system. The activities |
| on this system are monitored.                      |
| Evidence of unauthorised activities may be         |
| disclosed to the appropriate authorities.          |
+----------------------------------------------------+" > /etc/issue

###############################################################################
#
# Bash Remediation Script for PCI-DSS v4.0.1 Control Baseline for Red Hat Enterprise Linux 9
#
# Profile Description:
# Payment Card Industry - Data Security Standard (PCI-DSS) is a set of
# security standards designed to ensure the secure handling of payment card
# data, with the goal of preventing data breaches and protecting sensitive
# financial information.
# This profile ensures Red Hat Enterprise Linux 9 is configured in alignment
# with PCI-DSS v4.0.1 requirements.
#
# Profile ID:  xccdf_org.ssgproject.content_profile_pci-dss
# Benchmark ID:  xccdf_org.ssgproject.content_benchmark_RHEL-9
# Benchmark Version:  0.1.79
# XCCDF Version:  1.2
#
# This file was generated by OpenSCAP 1.3.13 using:
# $ oscap xccdf generate fix --profile xccdf_org.ssgproject.content_profile_pci-dss --fix-type bash xccdf-file.xml
#
# This Bash Remediation Script is generated from an OpenSCAP profile without preliminary evaluation.
# It attempts to fix every selected rule, even if the system is already compliant.
#
# How to apply this Bash Remediation Script:
# $ sudo ./remediation-script.sh
#
###############################################################################

###############################################################################
# BEGIN fix (1 / 252) for 'xccdf_org.ssgproject.content_rule_rpm_verify_hashes'
###############################################################################
(>&2 echo "Remediating rule 1/252: 'xccdf_org.ssgproject.content_rule_rpm_verify_hashes'"); (
# Remediation is applicable only in certain platforms
if ! ( { rpm --quiet -q kernel-core ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ); then

# Find which files have incorrect hash (not in /etc, because of the system related config files) and then get files names
files_with_incorrect_hash="$(rpm -Va --noconfig | grep -E '^..5' | awk '{print $NF}' )"

if [ -n "$files_with_incorrect_hash" ]; then
    # From files names get package names and change newline to space, because rpm writes each package to new line
    packages_to_reinstall="$(rpm -qf $files_with_incorrect_hash | tr '\n' ' ')"

    
    dnf reinstall -y $packages_to_reinstall
    
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_rpm_verify_hashes'

###############################################################################
# BEGIN fix (2 / 252) for 'xccdf_org.ssgproject.content_rule_rpm_verify_ownership'
###############################################################################
(>&2 echo "Remediating rule 2/252: 'xccdf_org.ssgproject.content_rule_rpm_verify_ownership'"); (
# Remediation is applicable only in certain platforms
if ! ( { rpm --quiet -q kernel-core ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ); then

# Declare array to hold set of RPM packages we need to correct permissions for
declare -A SETPERMS_RPM_DICT

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
readarray -t FILES_WITH_INCORRECT_PERMS < <(rpm -Va --nofiledigest | awk '{ if (substr($0,6,1)=="U" || substr($0,7,1)=="G") print $NF }')

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
        RPM_PACKAGE=$(rpm -qf "$FILE_PATH")
	# Use an associative array to store packages as it's keys, not having to care about duplicates.
	SETPERMS_RPM_DICT["$RPM_PACKAGE"]=1
done

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${!SETPERMS_RPM_DICT[@]}"
do
        rpm --restore "${RPM_PACKAGE}"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_rpm_verify_ownership'

###############################################################################
# BEGIN fix (3 / 252) for 'xccdf_org.ssgproject.content_rule_package_aide_installed'
###############################################################################
(>&2 echo "Remediating rule 3/252: 'xccdf_org.ssgproject.content_rule_package_aide_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_aide_installed'

###############################################################################
# BEGIN fix (4 / 252) for 'xccdf_org.ssgproject.content_rule_aide_build_database'
###############################################################################
(>&2 echo "Remediating rule 4/252: 'xccdf_org.ssgproject.content_rule_aide_build_database'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

/usr/sbin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_aide_build_database'

###############################################################################
# BEGIN fix (5 / 252) for 'xccdf_org.ssgproject.content_rule_aide_periodic_cron_checking'
###############################################################################
(>&2 echo "Remediating rule 5/252: 'xccdf_org.ssgproject.content_rule_aide_periodic_cron_checking'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi


if ! rpm -q --quiet "cronie" ; then
    dnf install -y "cronie"
fi



CRON_FILE="/etc/crontab"


if ! grep -q "/usr/sbin/aide --check" "${CRON_FILE}" ; then
    echo "05 4 * * * root /usr/sbin/aide --check" >> "${CRON_FILE}"
else
    sed -i '\!^.* --check.*$!d' "${CRON_FILE}"
    echo "05 4 * * * root /usr/sbin/aide --check" >> "${CRON_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_aide_periodic_cron_checking'

###############################################################################
# BEGIN fix (6 / 252) for 'xccdf_org.ssgproject.content_rule_configure_crypto_policy'
###############################################################################
(>&2 echo "Remediating rule 6/252: 'xccdf_org.ssgproject.content_rule_configure_crypto_policy'"); (

var_system_crypto_policy='DEFAULT'




stderr_of_call=$(update-crypto-policies --set ${var_system_crypto_policy} 2>&1 > /dev/null)
rc=$?

if test "$rc" = 127; then
	echo "$stderr_of_call" >&2
	echo "Make sure that the script is installed on the remediated system." >&2
	echo "See output of the 'dnf provides update-crypto-policies' command" >&2
	echo "to see what package to (re)install" >&2

	false  # end with an error code
elif test "$rc" != 0; then
	echo "Error invoking the update-crypto-policies script: $stderr_of_call" >&2
	false  # end with an error code
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_configure_crypto_policy'

###############################################################################
# BEGIN fix (7 / 252) for 'xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy'
###############################################################################
(>&2 echo "Remediating rule 7/252: 'xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

SSH_CONF="/etc/sysconfig/sshd"

sed -i "/^\s*CRYPTO_POLICY.*$/Id" $SSH_CONF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy'

###############################################################################
# BEGIN fix (8 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_db_up_to_date'
###############################################################################
(>&2 echo "Remediating rule 8/252: 'xccdf_org.ssgproject.content_rule_dconf_db_up_to_date'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { rpm --quiet -q kernel-core; }; then

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_db_up_to_date'

###############################################################################
# BEGIN fix (9 / 252) for 'xccdf_org.ssgproject.content_rule_enable_dconf_user_profile'
###############################################################################
(>&2 echo "Remediating rule 9/252: 'xccdf_org.ssgproject.content_rule_enable_dconf_user_profile'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_enable_dconf_user_profile' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_enable_dconf_user_profile'

###############################################################################
# BEGIN fix (10 / 252) for 'xccdf_org.ssgproject.content_rule_gnome_gdm_disable_automatic_login'
###############################################################################
(>&2 echo "Remediating rule 10/252: 'xccdf_org.ssgproject.content_rule_gnome_gdm_disable_automatic_login'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

if rpm --quiet -q gdm
then
	if ! grep -q "^AutomaticLoginEnable=" /etc/gdm/custom.conf
	then
		sed -i "/^\[daemon\]/a \
		AutomaticLoginEnable=False" /etc/gdm/custom.conf
	else
		sed -i "s/^AutomaticLoginEnable=.*/AutomaticLoginEnable=False/g" /etc/gdm/custom.conf
	fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_gnome_gdm_disable_automatic_login'

###############################################################################
# BEGIN fix (11 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount'
###############################################################################
(>&2 echo "Remediating rule 11/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/media-handling\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*automount\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)automount(\s*=)/#\1automount\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/media-handling\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/media-handling]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "false")"
if grep -q "^\\s*automount\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*automount\\s*=\\s*.*/automount=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/media-handling\\]|a\\automount=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/media-handling/automount$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/media-handling/automount$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/media-handling/automount$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/media-handling/automount" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount'

###############################################################################
# BEGIN fix (12 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount_open'
###############################################################################
(>&2 echo "Remediating rule 12/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount_open'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/media-handling\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*automount-open\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)automount-open(\s*=)/#\1automount-open\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/media-handling\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/media-handling]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "false")"
if grep -q "^\\s*automount-open\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*automount-open\\s*=\\s*.*/automount-open=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/media-handling\\]|a\\automount-open=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/media-handling/automount-open$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/media-handling/automount-open$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/media-handling/automount-open$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/media-handling/automount-open" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount_open'

###############################################################################
# BEGIN fix (13 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_activation_enabled'
###############################################################################
(>&2 echo "Remediating rule 13/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_activation_enabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*idle-activation-enabled\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)idle-activation-enabled(\s*=)/#\1idle-activation-enabled\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/screensaver\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*idle-activation-enabled\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*idle-activation-enabled\\s*=\\s*.*/idle-activation-enabled=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\idle-activation-enabled=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/idle-activation-enabled$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/screensaver/idle-activation-enabled$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/screensaver/idle-activation-enabled$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/screensaver/idle-activation-enabled" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_activation_enabled'

###############################################################################
# BEGIN fix (14 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_delay'
###############################################################################
(>&2 echo "Remediating rule 14/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_delay'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

inactivity_timeout_value='900'


# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/session\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*idle-delay\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)idle-delay(\s*=)/#\1idle-delay\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/session\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/session]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "uint32 ${inactivity_timeout_value}")"
if grep -q "^\\s*idle-delay\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*idle-delay\\s*=\\s*.*/idle-delay=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/session\\]|a\\idle-delay=${escaped_value}" "${DCONFFILE}"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_delay'

###############################################################################
# BEGIN fix (15 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_delay'
###############################################################################
(>&2 echo "Remediating rule 15/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_delay'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

var_screensaver_lock_delay='10'


# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*lock-delay\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)lock-delay(\s*=)/#\1lock-delay\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/screensaver\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "uint32 ${var_screensaver_lock_delay}")"
if grep -q "^\\s*lock-delay\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*lock-delay\\s*=\\s*.*/lock-delay=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\lock-delay=${escaped_value}" "${DCONFFILE}"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_delay'

###############################################################################
# BEGIN fix (16 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_enabled'
###############################################################################
(>&2 echo "Remediating rule 16/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_enabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*lock-enabled\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)lock-enabled(\s*=)/#\1lock-enabled\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/screensaver\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*lock-enabled\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*lock-enabled\\s*=\\s*.*/lock-enabled=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\lock-enabled=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/lock-enabled$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/screensaver/lock-enabled$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/screensaver/lock-enabled$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/screensaver/lock-enabled" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_enabled'

###############################################################################
# BEGIN fix (17 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_mode_blank'
###############################################################################
(>&2 echo "Remediating rule 17/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_mode_blank'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*picture-uri\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)picture-uri(\s*=)/#\1picture-uri\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/screensaver\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "string ''")"
if grep -q "^\\s*picture-uri\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*picture-uri\\s*=\\s*.*/picture-uri=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\picture-uri=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/picture-uri$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/screensaver/picture-uri$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/screensaver/picture-uri$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/screensaver/picture-uri" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_mode_blank'

###############################################################################
# BEGIN fix (18 / 252) for 'xccdf_org.ssgproject.content_rule_dconf_gnome_session_idle_user_locks'
###############################################################################
(>&2 echo "Remediating rule 18/252: 'xccdf_org.ssgproject.content_rule_dconf_gnome_session_idle_user_locks'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/session/idle-delay$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/session/idle-delay$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/session/idle-delay$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/session/idle-delay" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_dconf_gnome_session_idle_user_locks'

###############################################################################
# BEGIN fix (19 / 252) for 'xccdf_org.ssgproject.content_rule_package_sudo_installed'
###############################################################################
(>&2 echo "Remediating rule 19/252: 'xccdf_org.ssgproject.content_rule_package_sudo_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "sudo" ; then
    dnf install -y "sudo"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_sudo_installed'

###############################################################################
# BEGIN fix (20 / 252) for 'xccdf_org.ssgproject.content_rule_sudo_add_use_pty'
###############################################################################
(>&2 echo "Remediating rule 20/252: 'xccdf_org.ssgproject.content_rule_sudo_add_use_pty'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q sudo; }; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\buse_pty.*$' /etc/sudoers; then
        # sudoers file doesn't define Option use_pty
        echo "Defaults use_pty" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sudo_add_use_pty'

###############################################################################
# BEGIN fix (21 / 252) for 'xccdf_org.ssgproject.content_rule_sudo_custom_logfile'
###############################################################################
(>&2 echo "Remediating rule 21/252: 'xccdf_org.ssgproject.content_rule_sudo_custom_logfile'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q sudo; }; then

var_sudo_logfile='/var/log/sudo.log'


if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\blogfile\s*=\s*(?:"?([^",\s]+)"?).*$' /etc/sudoers; then
        # sudoers file doesn't define Option logfile
        echo "Defaults logfile=${var_sudo_logfile}" >> /etc/sudoers
    else
        # sudoers file defines Option logfile, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*\blogfile=${var_sudo_logfile}\b.*$" /etc/sudoers; then
            
            escaped_variable=${var_sudo_logfile//$'/'/$'\/'}
            sed -Ei "s/(^[\s]*Defaults.*\blogfile=)[-]?.+(\b.*$)/\1$escaped_variable\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sudo_custom_logfile'

###############################################################################
# BEGIN fix (22 / 252) for 'xccdf_org.ssgproject.content_rule_sudo_require_authentication'
###############################################################################
(>&2 echo "Remediating rule 22/252: 'xccdf_org.ssgproject.content_rule_sudo_require_authentication'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+NOPASSWD[\s]*\:.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "NOPASSWD" matches to preserve user data
      sed -i "s|^${entry}$|# &|g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+\!authenticate.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "!authenticate" matches to preserve user data
      sed -i "s|^${entry}$|# &|g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sudo_require_authentication'

###############################################################################
# BEGIN fix (23 / 252) for 'xccdf_org.ssgproject.content_rule_sudo_require_reauthentication'
###############################################################################
(>&2 echo "Remediating rule 23/252: 'xccdf_org.ssgproject.content_rule_sudo_require_reauthentication'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q sudo; }; then

var_sudo_timestamp_timeout='5'


if grep -Px '^[\s]*Defaults.*timestamp_timeout[\s]*=.*' /etc/sudoers.d/*; then
    find /etc/sudoers.d/ -type f -exec sed -Ei "/^[[:blank:]]*Defaults.*timestamp_timeout[[:blank:]]*=.*/d" {} \;
fi

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults.*timestamp_timeout[\s]*=[\s]*[-]?\w+.*$' /etc/sudoers; then
        # sudoers file doesn't define Option timestamp_timeout
        echo "Defaults timestamp_timeout=${var_sudo_timestamp_timeout}" >> /etc/sudoers
    else
        # sudoers file defines Option timestamp_timeout, remediate wrong values if present
        if grep -qP "^[\s]*Defaults\s.*\btimestamp_timeout[\s]*=[\s]*(?!${var_sudo_timestamp_timeout}\b)[-]?\w+\b.*$" /etc/sudoers; then
            sed -Ei "s/(^[[:blank:]]*Defaults.*timestamp_timeout[[:blank:]]*=)[[:blank:]]*[-]?\w+(.*$)/\1${var_sudo_timestamp_timeout}\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sudo_require_reauthentication'

###############################################################################
# BEGIN fix (24 / 252) for 'xccdf_org.ssgproject.content_rule_package_cryptsetup-luks_installed'
###############################################################################
(>&2 echo "Remediating rule 24/252: 'xccdf_org.ssgproject.content_rule_package_cryptsetup-luks_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "cryptsetup" ; then
    dnf install -y "cryptsetup"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_cryptsetup-luks_installed'

###############################################################################
# BEGIN fix (25 / 252) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'
###############################################################################
(>&2 echo "Remediating rule 25/252: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q dnf; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/dnf/dnf.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/dnf/dnf.conf"
else
    if [[ -s "/etc/dnf/dnf.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/dnf/dnf.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/dnf/dnf.conf"
    fi
    cce="CCE-83457-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/dnf/dnf.conf" >> "/etc/dnf/dnf.conf"
    printf '%s\n' "$formatted_output" >> "/etc/dnf/dnf.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'

###############################################################################
# BEGIN fix (26 / 252) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'
###############################################################################
(>&2 echo "Remediating rule 26/252: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'"); (

sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*

) # END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'

###############################################################################
# BEGIN fix (27 / 252) for 'xccdf_org.ssgproject.content_rule_ensure_redhat_gpgkey_installed'
###############################################################################
(>&2 echo "Remediating rule 27/252: 'xccdf_org.ssgproject.content_rule_ensure_redhat_gpgkey_installed'"); (
# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_FINGERPRINT="567E347AD0044ADE55BA8A5F199E2F91FD431D51"
readonly REDHAT_AUXILIARY_FINGERPRINT="7E4624258C406535D56D6F135054E4A45A6340B3"

# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).
  readarray -t GPG_OUT < <(gpg --show-keys --with-fingerprint --with-colons "$REDHAT_RELEASE_KEY" | grep -A1 "^pub" | grep "^fpr" | cut -d ":" -f 10)
  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    echo "${GPG_OUT[*]}" | grep -vE "${REDHAT_RELEASE_FINGERPRINT}|${REDHAT_AUXILIARY_FINGERPRINT}" || {
      # If $REDHAT_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${REDHAT_RELEASE_KEY}"
    }
  fi
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_ensure_redhat_gpgkey_installed'

###############################################################################
# BEGIN fix (28 / 252) for 'xccdf_org.ssgproject.content_rule_security_patches_up_to_date'
###############################################################################
(>&2 echo "Remediating rule 28/252: 'xccdf_org.ssgproject.content_rule_security_patches_up_to_date'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_security_patches_up_to_date' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_security_patches_up_to_date'

###############################################################################
# BEGIN fix (29 / 252) for 'xccdf_org.ssgproject.content_rule_enable_authselect'
###############################################################################
(>&2 echo "Remediating rule 29/252: 'xccdf_org.ssgproject.content_rule_enable_authselect'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_authselect_profile='sssd'


authselect current

if test "$?" -ne 0; then
    if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; }; then
        authselect select --force "$var_authselect_profile"
    else
        authselect select "$var_authselect_profile"
    fi

    if test "$?" -ne 0; then
        if rpm --quiet --verify pam; then
            authselect select --force "$var_authselect_profile"
        else
	        echo "authselect is not used but files from the 'pam' package have been altered, so the authselect configuration won't be forced." >&2
        fi
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_enable_authselect'

###############################################################################
# BEGIN fix (30 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue_net'
###############################################################################
(>&2 echo "Remediating rule 30/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue_net'"); (

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/issue.net" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/issue.net
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue_net'

###############################################################################
# BEGIN fix (31 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_issue_net'
###############################################################################
(>&2 echo "Remediating rule 31/252: 'xccdf_org.ssgproject.content_rule_file_owner_etc_issue_net'"); (

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/issue.net" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/issue.net
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_issue_net'

###############################################################################
# BEGIN fix (32 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_issue_net'
###############################################################################
(>&2 echo "Remediating rule 32/252: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_issue_net'"); (




chmod u-xs,g-xws,o-xwt /etc/issue.net

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_issue_net'

###############################################################################
# BEGIN fix (33 / 252) for 'xccdf_org.ssgproject.content_rule_display_login_attempts'
###############################################################################
(>&2 echo "Remediating rule 33/252: 'xccdf_org.ssgproject.content_rule_display_login_attempts'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q pam && rpm --quiet -q kernel-core ); then

if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-silent-lastlog; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect disable-feature with-silent-lastlog

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/postlogin")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if [ -e "$PAM_FILE_PATH" ] ; then
            PAM_FILE_PATH="$PAM_FILE_PATH"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            

                if ! grep -qP "^\s*session\s+\[default=1\]\s+pam_lastlog.so\s*.*" "$PAM_FILE_PATH"; then
                    # Line matching group + control + module was not found. Check group + module.
                    if [ "$(grep -cP '^\s*session\s+.*\s+pam_lastlog.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                        # The control is updated only if one single line matches.
                        sed -i -E --follow-symlinks "s/^(\s*session\s+).*(\bpam_lastlog.so.*)/\1[default=1] \2/" "$PAM_FILE_PATH"
                    else
                        LAST_MATCH_LINE=$(grep -nP "^\s*session\s+.*pam_succeed_if\.so.*" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                        if [ ! -z $LAST_MATCH_LINE ]; then
                            sed -i --follow-symlinks $LAST_MATCH_LINE" a session     [default=1]    pam_lastlog.so" "$PAM_FILE_PATH"
                        else
                            echo "session    [default=1]    pam_lastlog.so" >> "$PAM_FILE_PATH"
                        fi
                    fi
                fi
                # Check the option
                if ! grep -qP "^\s*session\s+\[default=1\]\s+pam_lastlog.so\s*.*\sshowfailed\b" "$PAM_FILE_PATH"; then
                    sed -i -E --follow-symlinks "/\s*session\s+\[default=1\]\s+pam_lastlog.so.*/ s/$/ showfailed/" "$PAM_FILE_PATH"
                fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$PAM_FILE_PATH was not found" >&2
        fi
        if [ -e "$PAM_FILE_PATH" ] ; then
            PAM_FILE_PATH="$PAM_FILE_PATH"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*session\s+[default=1]\s+pam_lastlog.so\s.*\bsilent\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*session.*[default=1].*pam_lastlog.so.*)\bsilent\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$PAM_FILE_PATH was not found" >&2
        fi
    fi
else
    if [ -e "/etc/pam.d/postlogin" ] ; then
            PAM_FILE_PATH="/etc/pam.d/postlogin"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "/etc/pam.d/postlogin")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            

                if ! grep -qP "^\s*session\s+\[default=1\]\s+pam_lastlog.so\s*.*" "$PAM_FILE_PATH"; then
                    # Line matching group + control + module was not found. Check group + module.
                    if [ "$(grep -cP '^\s*session\s+.*\s+pam_lastlog.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                        # The control is updated only if one single line matches.
                        sed -i -E --follow-symlinks "s/^(\s*session\s+).*(\bpam_lastlog.so.*)/\1[default=1] \2/" "$PAM_FILE_PATH"
                    else
                        LAST_MATCH_LINE=$(grep -nP "^\s*session\s+.*pam_succeed_if\.so.*" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                        if [ ! -z $LAST_MATCH_LINE ]; then
                            sed -i --follow-symlinks $LAST_MATCH_LINE" a session     [default=1]    pam_lastlog.so" "$PAM_FILE_PATH"
                        else
                            echo "session    [default=1]    pam_lastlog.so" >> "$PAM_FILE_PATH"
                        fi
                    fi
                fi
                # Check the option
                if ! grep -qP "^\s*session\s+\[default=1\]\s+pam_lastlog.so\s*.*\sshowfailed\b" "$PAM_FILE_PATH"; then
                    sed -i -E --follow-symlinks "/\s*session\s+\[default=1\]\s+pam_lastlog.so.*/ s/$/ showfailed/" "$PAM_FILE_PATH"
                fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "/etc/pam.d/postlogin was not found" >&2
        fi
    if [ -e "/etc/pam.d/postlogin" ] ; then
            PAM_FILE_PATH="/etc/pam.d/postlogin"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "/etc/pam.d/postlogin")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*session\s+[default=1]\s+pam_lastlog.so\s.*\bsilent\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*session.*[default=1].*pam_lastlog.so.*)\bsilent\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "/etc/pam.d/postlogin was not found" >&2
        fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_display_login_attempts'

###############################################################################
# BEGIN fix (34 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_password_auth'
###############################################################################
(>&2 echo "Remediating rule 34/252: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_password_auth'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q pam; }; then

var_password_pam_remember='4'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        
        if ! grep -qP "^\s*password\s+\$var_password_pam_remember_control_flag\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1$var_password_pam_remember_control_flag \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     $var_password_pam_remember_control_flag    pam_pwhistory.so" "$PAM_FILE_PATH"
                else
                    echo "password    $var_password_pam_remember_control_flag    pam_pwhistory.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else

    
    if ! grep -qP "^\s*password\s+\$var_password_pam_remember_control_flag\s+pam_pwhistory.so\s*.*" "/etc/pam.d/password-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/password-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1$var_password_pam_remember_control_flag \2/" "/etc/pam.d/password-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/password-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE" a password     $var_password_pam_remember_control_flag    pam_pwhistory.so" "/etc/pam.d/password-auth"
            else
                echo "password    $var_password_pam_remember_control_flag    pam_pwhistory.so" >> "/etc/pam.d/password-auth"
            fi
        fi
    fi

fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/password-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/password-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                # The "local" profile does not contain essential security features required by multiple Benchmarks.
                # If currently used, it is replaced by "sssd", which is the best option in this case.
                if [[ $CURRENT_PROFILE == local ]]; then
                    CURRENT_PROFILE="sssd"
                fi
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP "^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "s/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/password-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
        else
            echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwhistory.so.*/ s/$/ remember=$var_password_pam_remember/" "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_remember \3/" "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_password_auth'

###############################################################################
# BEGIN fix (35 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_system_auth'
###############################################################################
(>&2 echo "Remediating rule 35/252: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_system_auth'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q pam; }; then

var_password_pam_remember='4'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        
        if ! grep -qP "^\s*password\s+\$var_password_pam_remember_control_flag\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1$var_password_pam_remember_control_flag \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     $var_password_pam_remember_control_flag    pam_pwhistory.so" "$PAM_FILE_PATH"
                else
                    echo "password    $var_password_pam_remember_control_flag    pam_pwhistory.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else

    
    if ! grep -qP "^\s*password\s+\$var_password_pam_remember_control_flag\s+pam_pwhistory.so\s*.*" "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1$var_password_pam_remember_control_flag \2/" "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE" a password     $var_password_pam_remember_control_flag    pam_pwhistory.so" "/etc/pam.d/system-auth"
            else
                echo "password    $var_password_pam_remember_control_flag    pam_pwhistory.so" >> "/etc/pam.d/system-auth"
            fi
        fi
    fi

fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                # The "local" profile does not contain essential security features required by multiple Benchmarks.
                # If currently used, it is replaced by "sssd", which is the best option in this case.
                if [[ $CURRENT_PROFILE == local ]]; then
                    CURRENT_PROFILE="sssd"
                fi
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP "^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "s/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
        else
            echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwhistory.so.*/ s/$/ remember=$var_password_pam_remember/" "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_remember \3/" "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_system_auth'

###############################################################################
# BEGIN fix (36 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'
###############################################################################
(>&2 echo "Remediating rule 36/252: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q libpwquality; }; then

var_password_pam_unix_remember='4'






if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        
        if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "$PAM_FILE_PATH"
                else
                    echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else

    
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "/etc/pam.d/system-auth"
            else
                echo "password    requisite    pam_pwhistory.so" >> "/etc/pam.d/system-auth"
            fi
        fi
    fi

fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_unix_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_unix_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                # The "local" profile does not contain essential security features required by multiple Benchmarks.
                # If currently used, it is replaced by "sssd", which is the best option in this case.
                if [[ $CURRENT_PROFILE == local ]]; then
                    CURRENT_PROFILE="sssd"
                fi
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP "^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "s/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
        else
            echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwhistory.so.*/ s/$/ remember=$var_password_pam_unix_remember/" "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_unix_remember \3/" "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'

###############################################################################
# BEGIN fix (37 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'
###############################################################################
(>&2 echo "Remediating rule 37/252: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_deny='10'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"deny"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'

###############################################################################
# BEGIN fix (38 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'
###############################################################################
(>&2 echo "Remediating rule 38/252: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_unlock_time='1800'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"unlock_time"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'

###############################################################################
# BEGIN fix (39 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'
###############################################################################
(>&2 echo "Remediating rule 39/252: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q libpwquality; }; then

var_password_pam_dcredit='-1'



if grep -sq dcredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/dcredit/d" /etc/security/pwquality.conf.d/*.conf
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83566-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'

###############################################################################
# BEGIN fix (40 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'
###############################################################################
(>&2 echo "Remediating rule 40/252: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q libpwquality; }; then

var_password_pam_lcredit='-1'



if grep -sq lcredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/lcredit/d" /etc/security/pwquality.conf.d/*.conf
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83570-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'

###############################################################################
# BEGIN fix (41 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'
###############################################################################
(>&2 echo "Remediating rule 41/252: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q libpwquality; }; then

var_password_pam_minlen='12'



if grep -sq minlen /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/minlen/d" /etc/security/pwquality.conf.d/*.conf
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83579-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'

###############################################################################
# BEGIN fix (42 / 252) for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_libuserconf'
###############################################################################
(>&2 echo "Remediating rule 42/252: 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_libuserconf'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q libuser; }; then

var_password_hashing_algorithm_pam='sha512'

LIBUSER_CONF="/etc/libuser.conf"
CRYPT_STYLE_REGEX='[[:space:]]*\[defaults](.*(\n)+)+?[[:space:]]*crypt_style[[:space:]]*'

# Try find crypt_style in [defaults] section. If it is here, then change algorithm to sha512.
# If it isn't here, then add it to [defaults] section.
if grep -qzosP $CRYPT_STYLE_REGEX $LIBUSER_CONF ; then
        sed -i "s/\(crypt_style[[:space:]]*=[[:space:]]*\).*/\1$var_password_hashing_algorithm_pam/g" $LIBUSER_CONF
elif grep -qs "\[defaults]" $LIBUSER_CONF ; then
        sed -i "/[[:space:]]*\[defaults]/a crypt_style = $var_password_hashing_algorithm_pam" $LIBUSER_CONF
else
        echo -e "[defaults]\ncrypt_style = $var_password_hashing_algorithm_pam" >> $LIBUSER_CONF
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_libuserconf'

###############################################################################
# BEGIN fix (43 / 252) for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs'
###############################################################################
(>&2 echo "Remediating rule 43/252: 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q shadow-utils; }; then

var_password_hashing_algorithm='SHA512'


# Allow multiple algorithms, but choose the first one for remediation
#
var_password_hashing_algorithm="$(echo $var_password_hashing_algorithm | cut -d \| -f 1)"

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ENCRYPT_METHOD")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_password_hashing_algorithm"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ENCRYPT_METHOD\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ENCRYPT_METHOD\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-90590-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs'

###############################################################################
# BEGIN fix (44 / 252) for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth'
###############################################################################
(>&2 echo "Remediating rule 44/252: 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q pam; }; then

var_password_hashing_algorithm_pam='sha512'


PAM_FILE_PATH="/etc/pam.d/system-auth"


# Ensure all the hashing algorithm option is removed.
declare -a HASHING_ALGORITHMS_OPTIONS=("sha512" "yescrypt" "gost_yescrypt" "blowfish" "sha256" "md5" "bigcrypt")

for hash_option in "${HASHING_ALGORITHMS_OPTIONS[@]}"; do
  if grep -qP "^\s*password\s+.*\s+pam_unix.so\s+.*\b$hash_option\b" "$PAM_FILE_PATH"; then
    if [ -e "$PAM_FILE_PATH" ] ; then
    PAM_FILE_PATH="$PAM_FILE_PATH"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s+.*\s+pam_unix.so\s.*\b$hash_option\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*.*.*pam_unix.so.*)\b$hash_option\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "$PAM_FILE_PATH was not found" >&2
fi
  fi
done

if [ -e "$PAM_FILE_PATH" ] ; then
    PAM_FILE_PATH="$PAM_FILE_PATH"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_unix.so.*)/\1sufficient \2/" "$PAM_FILE_PATH"
            else
                echo "password    sufficient    pam_unix.so" >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*\s$var_password_hashing_algorithm_pam\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "/\s*password\s+sufficient\s+pam_unix.so.*/ s/$/ $var_password_hashing_algorithm_pam/" "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "$PAM_FILE_PATH was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth'

###############################################################################
# BEGIN fix (45 / 252) for 'xccdf_org.ssgproject.content_rule_account_unique_id'
###############################################################################
(>&2 echo "Remediating rule 45/252: 'xccdf_org.ssgproject.content_rule_account_unique_id'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_account_unique_id' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_account_unique_id'

###############################################################################
# BEGIN fix (46 / 252) for 'xccdf_org.ssgproject.content_rule_group_unique_id'
###############################################################################
(>&2 echo "Remediating rule 46/252: 'xccdf_org.ssgproject.content_rule_group_unique_id'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_group_unique_id' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_group_unique_id'

###############################################################################
# BEGIN fix (47 / 252) for 'xccdf_org.ssgproject.content_rule_account_disable_post_pw_expiration'
###############################################################################
(>&2 echo "Remediating rule 47/252: 'xccdf_org.ssgproject.content_rule_account_disable_post_pw_expiration'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q shadow-utils; }; then

var_account_disable_post_pw_expiration='90'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^INACTIVE")

# shellcheck disable=SC2059
printf -v formatted_output "%s=%s" "$stripped_key" "$var_account_disable_post_pw_expiration"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^INACTIVE\\>" "/etc/default/useradd"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^INACTIVE\\>.*/$escaped_formatted_output/gi" "/etc/default/useradd"
else
    if [[ -s "/etc/default/useradd" ]] && [[ -n "$(tail -c 1 -- "/etc/default/useradd" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/default/useradd"
    fi
    cce="CCE-83627-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/default/useradd" >> "/etc/default/useradd"
    printf '%s\n' "$formatted_output" >> "/etc/default/useradd"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_account_disable_post_pw_expiration'

###############################################################################
# BEGIN fix (48 / 252) for 'xccdf_org.ssgproject.content_rule_account_unique_name'
###############################################################################
(>&2 echo "Remediating rule 48/252: 'xccdf_org.ssgproject.content_rule_account_unique_name'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_account_unique_name' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_account_unique_name'

###############################################################################
# BEGIN fix (49 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_maximum_age_login_defs'
###############################################################################
(>&2 echo "Remediating rule 49/252: 'xccdf_org.ssgproject.content_rule_accounts_maximum_age_login_defs'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q shadow-utils; }; then

var_accounts_maximum_age_login_defs='90'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^PASS_MAX_DAYS")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_maximum_age_login_defs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^PASS_MAX_DAYS\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^PASS_MAX_DAYS\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-83606-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_maximum_age_login_defs'

###############################################################################
# BEGIN fix (50 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing'
###############################################################################
(>&2 echo "Remediating rule 50/252: 'xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_accounts_maximum_age_login_defs='90'


while IFS= read -r i; do
    
    chage -M $var_accounts_maximum_age_login_defs $i

done <   <(awk -v var="$var_accounts_maximum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($5 > var || $5 == "")) {print $1}' /etc/shadow)

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing'

###############################################################################
# BEGIN fix (51 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_set_warn_age_existing'
###############################################################################
(>&2 echo "Remediating rule 51/252: 'xccdf_org.ssgproject.content_rule_accounts_password_set_warn_age_existing'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_accounts_password_warn_age_login_defs='7'


while IFS= read -r i; do
    chage --warndays $var_accounts_password_warn_age_login_defs $i
done <   <(awk -v var="$var_accounts_password_warn_age_login_defs" -F: '(($6 < var || $6 == "") && $2 ~ /^\$/) {print $1}' /etc/shadow)

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_set_warn_age_existing'

###############################################################################
# BEGIN fix (52 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_warn_age_login_defs'
###############################################################################
(>&2 echo "Remediating rule 52/252: 'xccdf_org.ssgproject.content_rule_accounts_password_warn_age_login_defs'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q shadow-utils; }; then

var_accounts_password_warn_age_login_defs='7'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^PASS_WARN_AGE")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_password_warn_age_login_defs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^PASS_WARN_AGE\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^PASS_WARN_AGE\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-83609-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_warn_age_login_defs'

###############################################################################
# BEGIN fix (53 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_set_post_pw_existing'
###############################################################################
(>&2 echo "Remediating rule 53/252: 'xccdf_org.ssgproject.content_rule_accounts_set_post_pw_existing'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_account_disable_post_pw_expiration='90'


while IFS= read -r i; do
    chage --inactive $var_account_disable_post_pw_expiration $i
done <   <(awk -v var="$var_account_disable_post_pw_expiration" -F: '(($7 > var || $7 == "") && $2 ~ /^\$/) {print $1}' /etc/shadow)

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_set_post_pw_existing'

###############################################################################
# BEGIN fix (54 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed'
###############################################################################
(>&2 echo "Remediating rule 54/252: 'xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed'

###############################################################################
# BEGIN fix (55 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_password_last_change_is_in_past'
###############################################################################
(>&2 echo "Remediating rule 55/252: 'xccdf_org.ssgproject.content_rule_accounts_password_last_change_is_in_past'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_accounts_password_last_change_is_in_past' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_last_change_is_in_past'

###############################################################################
# BEGIN fix (56 / 252) for 'xccdf_org.ssgproject.content_rule_gid_passwd_group_same'
###############################################################################
(>&2 echo "Remediating rule 56/252: 'xccdf_org.ssgproject.content_rule_gid_passwd_group_same'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_gid_passwd_group_same' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_gid_passwd_group_same'

###############################################################################
# BEGIN fix (57 / 252) for 'xccdf_org.ssgproject.content_rule_no_empty_passwords'
###############################################################################
(>&2 echo "Remediating rule 57/252: 'xccdf_org.ssgproject.content_rule_no_empty_passwords'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature without-nullok

authselect apply-changes -b
else
    
if grep -qP "^\s*auth\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks "s/(.*auth.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/system-auth"
fi
    
if grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks "s/(.*password.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/system-auth"
fi
    
if grep -qP "^\s*auth\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks "s/(.*auth.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/password-auth"
fi
    
if grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks "s/(.*password.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/password-auth"
fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_no_empty_passwords'

###############################################################################
# BEGIN fix (58 / 252) for 'xccdf_org.ssgproject.content_rule_no_empty_passwords_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 58/252: 'xccdf_org.ssgproject.content_rule_no_empty_passwords_etc_shadow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

readarray -t users_with_empty_pass < <(sudo awk -F: '!$2 {print $1}' /etc/shadow)

for user_with_empty_pass in "${users_with_empty_pass[@]}"
do
    passwd -l $user_with_empty_pass
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_no_empty_passwords_etc_shadow'

###############################################################################
# BEGIN fix (59 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero'
###############################################################################
(>&2 echo "Remediating rule 59/252: 'xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs --no-run-if-empty --max-lines=1 passwd -l

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero'

###############################################################################
# BEGIN fix (60 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_root_gid_zero'
###############################################################################
(>&2 echo "Remediating rule 60/252: 'xccdf_org.ssgproject.content_rule_accounts_root_gid_zero'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_accounts_root_gid_zero' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_root_gid_zero'

###############################################################################
# BEGIN fix (61 / 252) for 'xccdf_org.ssgproject.content_rule_ensure_pam_wheel_group_empty'
###############################################################################
(>&2 echo "Remediating rule 61/252: 'xccdf_org.ssgproject.content_rule_ensure_pam_wheel_group_empty'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_pam_wheel_group_for_su='sugroup'


# Workaround for https://github.com/OpenSCAP/openscap/issues/2242: Use full
# path to groupadd command to avoid the issue with the command not being found.
if ! grep -q "^${var_pam_wheel_group_for_su}:[^:]*:[^:]*:[^:]*" /etc/group; then
    /usr/sbin/groupadd ${var_pam_wheel_group_for_su}
fi

# group must be empty
gpasswd -M '' ${var_pam_wheel_group_for_su}

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_ensure_pam_wheel_group_empty'

###############################################################################
# BEGIN fix (62 / 252) for 'xccdf_org.ssgproject.content_rule_ensure_root_password_configured'
###############################################################################
(>&2 echo "Remediating rule 62/252: 'xccdf_org.ssgproject.content_rule_ensure_root_password_configured'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_ensure_root_password_configured' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_ensure_root_password_configured'

###############################################################################
# BEGIN fix (63 / 252) for 'xccdf_org.ssgproject.content_rule_no_direct_root_logins'
###############################################################################
(>&2 echo "Remediating rule 63/252: 'xccdf_org.ssgproject.content_rule_no_direct_root_logins'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

echo > /etc/securetty

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_no_direct_root_logins'

###############################################################################
# BEGIN fix (64 / 252) for 'xccdf_org.ssgproject.content_rule_no_password_auth_for_systemaccounts'
###############################################################################
(>&2 echo "Remediating rule 64/252: 'xccdf_org.ssgproject.content_rule_no_password_auth_for_systemaccounts'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

readarray -t systemaccounts < <(awk -F: \
  '($3 < 1000 && $3 != root && $3 != halt && $3 != sync && $3 != shutdown \
  && $3 != nfsnobody) { print $1 }' /etc/passwd)

for systemaccount in "${systemaccounts[@]}"; do
    usermod -L "$systemaccount"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_no_password_auth_for_systemaccounts'

###############################################################################
# BEGIN fix (65 / 252) for 'xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts'
###############################################################################
(>&2 echo "Remediating rule 65/252: 'xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

readarray -t systemaccounts < <(awk -F: '($3 < 1000 && $3 != root \
  && $7 != "\/sbin\/shutdown" && $7 != "\/sbin\/halt" && $7 != "\/bin\/sync") \
  { print $1 }' /etc/passwd)

for systemaccount in "${systemaccounts[@]}"; do
    usermod -s /sbin/nologin "$systemaccount"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts'

###############################################################################
# BEGIN fix (66 / 252) for 'xccdf_org.ssgproject.content_rule_securetty_root_login_console_only'
###############################################################################
(>&2 echo "Remediating rule 66/252: 'xccdf_org.ssgproject.content_rule_securetty_root_login_console_only'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

sed -i '/^vc\/[0-9]/d' /etc/securetty

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_securetty_root_login_console_only'

###############################################################################
# BEGIN fix (67 / 252) for 'xccdf_org.ssgproject.content_rule_use_pam_wheel_group_for_su'
###############################################################################
(>&2 echo "Remediating rule 67/252: 'xccdf_org.ssgproject.content_rule_use_pam_wheel_group_for_su'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_pam_wheel_group_for_su='sugroup'


PAM_CONF=/etc/pam.d/su

pamstr=$(grep -P '^auth\s+required\s+pam_wheel\.so\s+(?=[^#]*\buse_uid\b)(?=[^#]*\bgroup=)' ${PAM_CONF})
if [ -z "$pamstr" ]; then
    sed -Ei '/^auth\b.*\brequired\b.*\bpam_wheel\.so/d' ${PAM_CONF} # remove any remaining uncommented pam_wheel.so line
    sed -Ei "/^auth\s+sufficient\s+pam_rootok\.so.*$/a auth             required        pam_wheel.so use_uid group=${var_pam_wheel_group_for_su}" ${PAM_CONF}
else
    group_val=$(echo -n "$pamstr" | grep -Eo '\bgroup=[_a-z][-0-9_a-z]*' | cut -d '=' -f 2)
    if [ -z "${group_val}" ] || [ ${group_val} != ${var_pam_wheel_group_for_su} ]; then
        sed -Ei "s/(^auth\s+required\s+pam_wheel.so\s+[^#]*group=)[_a-z][-0-9_a-z]*/\1${var_pam_wheel_group_for_su}/" ${PAM_CONF}
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_use_pam_wheel_group_for_su'

###############################################################################
# BEGIN fix (68 / 252) for 'xccdf_org.ssgproject.content_rule_accounts_tmout'
###############################################################################
(>&2 echo "Remediating rule 68/252: 'xccdf_org.ssgproject.content_rule_accounts_tmout'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_accounts_tmout='600'


# if 0, no occurrence of tmout found, if 1, occurrence found
tmout_found=0


for f in /etc/profile /etc/profile.d/*.sh; do

    if grep --silent '^[^#].*TMOUT' $f; then
        sed -i -E "s/^(.*)TMOUT\s*=\s*(\w|\$)*(.*)$/typeset -xr TMOUT=$var_accounts_tmout\3/g" $f
        tmout_found=1
    fi
done

if [ $tmout_found -eq 0 ]; then
        echo -e "\n# Set TMOUT to $var_accounts_tmout per security requirements" >> /etc/profile.d/tmout.sh
        echo "typeset -xr TMOUT=$var_accounts_tmout" >> /etc/profile.d/tmout.sh
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_accounts_tmout'

###############################################################################
# BEGIN fix (69 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_grub2_cfg'
###############################################################################
(>&2 echo "Remediating rule 69/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_grub2_cfg'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel-core ) && { ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ); }; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/boot/grub2/grub.cfg" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /boot/grub2/grub.cfg
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_grub2_cfg'

###############################################################################
# BEGIN fix (70 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_user_cfg'
###############################################################################
(>&2 echo "Remediating rule 70/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_user_cfg'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel-core ) && { ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ); }; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/boot/grub2/user.cfg" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /boot/grub2/user.cfg
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_user_cfg'

###############################################################################
# BEGIN fix (71 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_grub2_cfg'
###############################################################################
(>&2 echo "Remediating rule 71/252: 'xccdf_org.ssgproject.content_rule_file_owner_grub2_cfg'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel-core ) && { ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ); }; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/boot/grub2/grub.cfg" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /boot/grub2/grub.cfg
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_grub2_cfg'

###############################################################################
# BEGIN fix (72 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_user_cfg'
###############################################################################
(>&2 echo "Remediating rule 72/252: 'xccdf_org.ssgproject.content_rule_file_owner_user_cfg'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel-core ) && { ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ); }; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/boot/grub2/user.cfg" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /boot/grub2/user.cfg
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_user_cfg'

###############################################################################
# BEGIN fix (73 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_grub2_cfg'
###############################################################################
(>&2 echo "Remediating rule 73/252: 'xccdf_org.ssgproject.content_rule_file_permissions_grub2_cfg'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel-core ) && { ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ); }; then

chmod u-xs,g-xwrs,o-xwrt /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_grub2_cfg'

###############################################################################
# BEGIN fix (74 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_user_cfg'
###############################################################################
(>&2 echo "Remediating rule 74/252: 'xccdf_org.ssgproject.content_rule_file_permissions_user_cfg'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel-core ) && { ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ); }; then

chmod u-xs,g-xwrs,o-xwrt /boot/grub2/user.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_user_cfg'

###############################################################################
# BEGIN fix (75 / 252) for 'xccdf_org.ssgproject.content_rule_rsyslog_files_groupownership'
###############################################################################
(>&2 echo "Remediating rule 75/252: 'xccdf_org.ssgproject.content_rule_rsyslog_files_groupownership'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && rpm --quiet -q rsyslog; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chgrp"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_rsyslog_files_groupownership'

###############################################################################
# BEGIN fix (76 / 252) for 'xccdf_org.ssgproject.content_rule_rsyslog_files_ownership'
###############################################################################
(>&2 echo "Remediating rule 76/252: 'xccdf_org.ssgproject.content_rule_rsyslog_files_ownership'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && rpm --quiet -q rsyslog; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chown"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_rsyslog_files_ownership'

###############################################################################
# BEGIN fix (77 / 252) for 'xccdf_org.ssgproject.content_rule_rsyslog_files_permissions'
###############################################################################
(>&2 echo "Remediating rule 77/252: 'xccdf_org.ssgproject.content_rule_rsyslog_files_permissions'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && rpm --quiet -q rsyslog; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chmod"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "0640" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_rsyslog_files_permissions'

###############################################################################
# BEGIN fix (78 / 252) for 'xccdf_org.ssgproject.content_rule_package_logrotate_installed'
###############################################################################
(>&2 echo "Remediating rule 78/252: 'xccdf_org.ssgproject.content_rule_package_logrotate_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "logrotate" ; then
    dnf install -y "logrotate"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_logrotate_installed'

###############################################################################
# BEGIN fix (79 / 252) for 'xccdf_org.ssgproject.content_rule_timer_logrotate_enabled'
###############################################################################
(>&2 echo "Remediating rule 79/252: 'xccdf_org.ssgproject.content_rule_timer_logrotate_enabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { ( grep -qP "^ID=[\"']?rhel[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="9"; printf "%s\n%s" "$expected" "$real" | sort -VC; } && rpm --quiet -q logrotate ); }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'logrotate.timer'
fi
"$SYSTEMCTL_EXEC" enable 'logrotate.timer'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_timer_logrotate_enabled'

###############################################################################
# BEGIN fix (80 / 252) for 'xccdf_org.ssgproject.content_rule_network_nmcli_permissions'
###############################################################################
(>&2 echo "Remediating rule 80/252: 'xccdf_org.ssgproject.content_rule_network_nmcli_permissions'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q polkit; then

if ! rpm -q --quiet "polkit-pkla-compat" ; then
    dnf install -y "polkit-pkla-compat"
fi
printf "[Disable General User Access to NetworkManager]\nIdentity=default\nAction=org.freedesktop.NetworkManager.*\nResultAny=no\nResultInactive=no\nResultActive=auth_admin\n" > /etc/polkit-1/localauthority/20-org.d/10-nm-harden-access.pkla

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_network_nmcli_permissions'

###############################################################################
# BEGIN fix (81 / 252) for 'xccdf_org.ssgproject.content_rule_network_sniffer_disabled'
###############################################################################
(>&2 echo "Remediating rule 81/252: 'xccdf_org.ssgproject.content_rule_network_sniffer_disabled'"); (
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

for interface in $(ip -o link show | cut -d ":" -f 2); do
    ip link set dev $interface multicast off promisc off
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_network_sniffer_disabled'

###############################################################################
# BEGIN fix (82 / 252) for 'xccdf_org.ssgproject.content_rule_package_firewalld_installed'
###############################################################################
(>&2 echo "Remediating rule 82/252: 'xccdf_org.ssgproject.content_rule_package_firewalld_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "firewalld" ; then
    dnf install -y "firewalld"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_firewalld_installed'

###############################################################################
# BEGIN fix (83 / 252) for 'xccdf_org.ssgproject.content_rule_service_firewalld_enabled'
###############################################################################
(>&2 echo "Remediating rule 83/252: 'xccdf_org.ssgproject.content_rule_service_firewalld_enabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q firewalld; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'firewalld.service'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'firewalld.service'
fi
"$SYSTEMCTL_EXEC" enable 'firewalld.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_service_firewalld_enabled'

###############################################################################
# BEGIN fix (84 / 252) for 'xccdf_org.ssgproject.content_rule_configure_firewalld_ports'
###############################################################################
(>&2 echo "Remediating rule 84/252: 'xccdf_org.ssgproject.content_rule_configure_firewalld_ports'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_configure_firewalld_ports' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_configure_firewalld_ports'

###############################################################################
# BEGIN fix (85 / 252) for 'xccdf_org.ssgproject.content_rule_firewalld_loopback_traffic_restricted'
###############################################################################
(>&2 echo "Remediating rule 85/252: 'xccdf_org.ssgproject.content_rule_firewalld_loopback_traffic_restricted'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "firewalld" ; then
    dnf install -y "firewalld"
fi

ipv4_rule='rule family=ipv4 source address="127.0.0.1" destination not address="127.0.0.1" drop'
ipv6_rule='rule family=ipv6 source address="::1" destination not address="::1" drop'

if test "$(stat -c %d:%i /)" != "$(stat -c %d:%i /proc/1/root/.)" || { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; }; then
    firewall-offline-cmd --zone=trusted --add-rich-rule="${ipv4_rule}"
    firewall-offline-cmd --zone=trusted --add-rich-rule="${ipv6_rule}"
elif systemctl is-active firewalld; then
    firewall-cmd --permanent --zone=trusted --add-rich-rule="${ipv4_rule}"
    firewall-cmd --permanent --zone=trusted --add-rich-rule="${ipv6_rule}"
    firewall-cmd --reload
else
    echo "
    firewalld service is not active. Remediation aborted!
    This remediation could not be applied because it depends on firewalld service running.
    The service is not started by this remediation in order to prevent connection issues."
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_firewalld_loopback_traffic_restricted'

###############################################################################
# BEGIN fix (86 / 252) for 'xccdf_org.ssgproject.content_rule_firewalld_loopback_traffic_trusted'
###############################################################################
(>&2 echo "Remediating rule 86/252: 'xccdf_org.ssgproject.content_rule_firewalld_loopback_traffic_trusted'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "firewalld" ; then
    dnf install -y "firewalld"
fi

if test "$(stat -c %d:%i /)" != "$(stat -c %d:%i /proc/1/root/.)" || { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; }; then
    firewall-offline-cmd --zone=trusted --add-interface=lo
elif systemctl is-active firewalld; then
    firewall-cmd --permanent --zone=trusted --add-interface=lo
    firewall-cmd --reload
else
    echo "
    firewalld service is not active. Remediation aborted!
    This remediation could not be applied because it depends on firewalld service running.
    The service is not started by this remediation in order to prevent connection issues."
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_firewalld_loopback_traffic_trusted'

###############################################################################
# BEGIN fix (87 / 252) for 'xccdf_org.ssgproject.content_rule_set_firewalld_default_zone'
###############################################################################
(>&2 echo "Remediating rule 87/252: 'xccdf_org.ssgproject.content_rule_set_firewalld_default_zone'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_set_firewalld_default_zone' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_set_firewalld_default_zone'

###############################################################################
# BEGIN fix (88 / 252) for 'xccdf_org.ssgproject.content_rule_set_ip6tables_default_rule'
###############################################################################
(>&2 echo "Remediating rule 88/252: 'xccdf_org.ssgproject.content_rule_set_ip6tables_default_rule'"); (
# Remediation is applicable only in certain platforms
if ( ! ( rpm --quiet -q nftables ) && ! ( rpm --quiet -q ufw ) && rpm --quiet -q iptables ); then

sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/ip6tables

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_set_ip6tables_default_rule'

###############################################################################
# BEGIN fix (89 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 89/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"
fi

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84130-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'

###############################################################################
# BEGIN fix (90 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'
###############################################################################
(>&2 echo "Remediating rule 90/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"
fi

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84008-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'

###############################################################################
# BEGIN fix (91 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'
###############################################################################
(>&2 echo "Remediating rule 91/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"
fi

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84016-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'

###############################################################################
# BEGIN fix (92 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 92/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"
fi

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84003-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'

###############################################################################
# BEGIN fix (93 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts'
###############################################################################
(>&2 echo "Remediating rule 93/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"
fi

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84004-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts'

###############################################################################
# BEGIN fix (94 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'
###############################################################################
(>&2 echo "Remediating rule 94/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"
fi

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84015-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'

###############################################################################
# BEGIN fix (95 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'
###############################################################################
(>&2 echo "Remediating rule 95/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"
fi

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84006-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'

###############################################################################
# BEGIN fix (96 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'
###############################################################################
(>&2 echo "Remediating rule 96/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"
fi

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83997-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'

###############################################################################
# BEGIN fix (97 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'
###############################################################################
(>&2 echo "Remediating rule 97/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects="0"
fi

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83999-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'

###############################################################################
# BEGIN fix (98 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'
###############################################################################
(>&2 echo "Remediating rule 98/252: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.ip_forward
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.ip_forward="0"
fi

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83998-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'

###############################################################################
# BEGIN fix (99 / 252) for 'xccdf_org.ssgproject.content_rule_package_nftables_installed'
###############################################################################
(>&2 echo "Remediating rule 99/252: 'xccdf_org.ssgproject.content_rule_package_nftables_installed'"); (
# Remediation is applicable only in certain platforms
if ( ! (systemctl is-active iptables &>/dev/null) && ! (systemctl is-active ufw &>/dev/null) && rpm --quiet -q kernel-core ); then

if ! rpm -q --quiet "nftables" ; then
    dnf install -y "nftables"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_nftables_installed'

###############################################################################
# BEGIN fix (100 / 252) for 'xccdf_org.ssgproject.content_rule_service_nftables_disabled'
###############################################################################
(>&2 echo "Remediating rule 100/252: 'xccdf_org.ssgproject.content_rule_service_nftables_disabled'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q firewalld && rpm --quiet -q nftables && rpm --quiet -q kernel-core ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'nftables.service'
fi
"$SYSTEMCTL_EXEC" disable 'nftables.service'
"$SYSTEMCTL_EXEC" mask 'nftables.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files nftables.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'nftables.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'nftables.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'nftables.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_service_nftables_disabled'

###############################################################################
# BEGIN fix (101 / 252) for 'xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled'
###############################################################################
(>&2 echo "Remediating rule 101/252: 'xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if LC_ALL=C grep -q -m 1 "^install dccp" /etc/modprobe.d/dccp.conf ; then
	
	sed -i 's#^install dccp.*#install dccp /bin/false#g' /etc/modprobe.d/dccp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/dccp.conf
	echo "install dccp /bin/false" >> /etc/modprobe.d/dccp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist dccp$" /etc/modprobe.d/dccp.conf ; then
	echo "blacklist dccp" >> /etc/modprobe.d/dccp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled'

###############################################################################
# BEGIN fix (102 / 252) for 'xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled'
###############################################################################
(>&2 echo "Remediating rule 102/252: 'xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if LC_ALL=C grep -q -m 1 "^install sctp" /etc/modprobe.d/sctp.conf ; then
	
	sed -i 's#^install sctp.*#install sctp /bin/false#g' /etc/modprobe.d/sctp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/sctp.conf
	echo "install sctp /bin/false" >> /etc/modprobe.d/sctp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist sctp$" /etc/modprobe.d/sctp.conf ; then
	echo "blacklist sctp" >> /etc/modprobe.d/sctp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled'

###############################################################################
# BEGIN fix (103 / 252) for 'xccdf_org.ssgproject.content_rule_wireless_disable_interfaces'
###############################################################################
(>&2 echo "Remediating rule 103/252: 'xccdf_org.ssgproject.content_rule_wireless_disable_interfaces'"); (
# Remediation is applicable only in certain platforms
if ( ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

if ! rpm -q --quiet "NetworkManager" ; then
    dnf install -y "NetworkManager"
fi

if command -v nmcli >/dev/null 2>&1 && systemctl is-active NetworkManager >/dev/null 2>&1; then
    nmcli radio all off
fi

if command -v wicked >/dev/null 2>&1 && systemctl is-active wickedd >/dev/null 2>&1; then
  if [ -n "$(find /sys/class/net/*/ -type d -name wireless)" ]; then
    interfaces=$(find /sys/class/net/*/wireless -type d -name wireless | xargs -0 dirname | xargs basename)
    for iface in $interfaces; do
      wicked ifdown $iface
      sed -i 's/STARTMODE=.*/STARTMODE=off/' /etc/sysconfig/network/ifcfg-$iface
    done
  fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_wireless_disable_interfaces'

###############################################################################
# BEGIN fix (104 / 252) for 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits'
###############################################################################
(>&2 echo "Remediating rule 104/252: 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits'"); (
df --local -P | awk '{if (NR!=1) print $6}' \
| xargs -I '$6' find '$6' -xdev -type d \
\( -perm -0002 -a ! -perm -1000 \) 2>/dev/null \
-exec chmod a+t {} +

) # END fix for 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits'

###############################################################################
# BEGIN fix (105 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable'
###############################################################################
(>&2 echo "Remediating rule 105/252: 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable'"); (

FILTER_NODEV=$(awk '/nodev/ { print $2 }' /proc/filesystems | paste -sd,)

# Do not consider /sysroot partition because it contains only the physical
# read-only root on bootable containers.
PARTITIONS=$(findmnt -n -l -k -it $FILTER_NODEV | awk '{ print $1 }' | grep -v "/sysroot")

for PARTITION in $PARTITIONS; do
  find "${PARTITION}" -xdev -type f -perm -002 -exec chmod o-w {} \; 2>/dev/null
done

# Ensure /tmp is also fixed when tmpfs is used.
if grep "^tmpfs /tmp" /proc/mounts; then
  find /tmp -xdev -type f -perm -002 -exec chmod o-w {} \; 2>/dev/null
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable'

###############################################################################
# BEGIN fix (106 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned'
###############################################################################
(>&2 echo "Remediating rule 106/252: 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned'

###############################################################################
# BEGIN fix (107 / 252) for 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user'
###############################################################################
(>&2 echo "Remediating rule 107/252: 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user'

###############################################################################
# BEGIN fix (108 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group'
###############################################################################
(>&2 echo "Remediating rule 108/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group'"); (

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/group-" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/group-
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group'

###############################################################################
# BEGIN fix (109 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 109/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd'"); (

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/passwd-" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/passwd-
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd'

###############################################################################
# BEGIN fix (110 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 110/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow'"); (

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/shadow-" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/shadow-
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow'

###############################################################################
# BEGIN fix (111 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_group'
###############################################################################
(>&2 echo "Remediating rule 111/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_group'"); (

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/group" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/group
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_group'

###############################################################################
# BEGIN fix (112 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 112/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd'"); (

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/passwd" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/passwd
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd'

###############################################################################
# BEGIN fix (113 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 113/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow'"); (

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/shadow" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/shadow
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow'

###############################################################################
# BEGIN fix (114 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_group'
###############################################################################
(>&2 echo "Remediating rule 114/252: 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_group'"); (

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/group-" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/group-
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_group'

###############################################################################
# BEGIN fix (115 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 115/252: 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd'"); (

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/passwd-" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/passwd-
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd'

###############################################################################
# BEGIN fix (116 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 116/252: 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow'"); (

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/shadow-" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/shadow-
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow'

###############################################################################
# BEGIN fix (117 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_group'
###############################################################################
(>&2 echo "Remediating rule 117/252: 'xccdf_org.ssgproject.content_rule_file_owner_etc_group'"); (

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/group" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/group
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_group'

###############################################################################
# BEGIN fix (118 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 118/252: 'xccdf_org.ssgproject.content_rule_file_owner_etc_passwd'"); (

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/passwd" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/passwd
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_passwd'

###############################################################################
# BEGIN fix (119 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 119/252: 'xccdf_org.ssgproject.content_rule_file_owner_etc_shadow'"); (

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/shadow" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/shadow
fi

fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_shadow'

###############################################################################
# BEGIN fix (120 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group'
###############################################################################
(>&2 echo "Remediating rule 120/252: 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group'"); (




chmod u-xs,g-xws,o-xwt /etc/group-

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group'

###############################################################################
# BEGIN fix (121 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 121/252: 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd'"); (




chmod u-xs,g-xws,o-xwt /etc/passwd-

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd'

###############################################################################
# BEGIN fix (122 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 122/252: 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow'"); (




chmod u-xwrs,g-xwrs,o-xwrt /etc/shadow-

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow'

###############################################################################
# BEGIN fix (123 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_group'
###############################################################################
(>&2 echo "Remediating rule 123/252: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_group'"); (




chmod u-xs,g-xws,o-xwt /etc/group

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_group'

###############################################################################
# BEGIN fix (124 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 124/252: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd'"); (




chmod u-xs,g-xws,o-xwt /etc/passwd

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd'

###############################################################################
# BEGIN fix (125 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 125/252: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow'"); (




chmod u-xwrs,g-xwrs,o-xwrt /etc/shadow

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow'

###############################################################################
# BEGIN fix (126 / 252) for 'xccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled'
###############################################################################
(>&2 echo "Remediating rule 126/252: 'xccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if LC_ALL=C grep -q -m 1 "^install usb-storage" /etc/modprobe.d/usb-storage.conf ; then
	
	sed -i 's#^install usb-storage.*#install usb-storage /bin/false#g' /etc/modprobe.d/usb-storage.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/usb-storage.conf
	echo "install usb-storage /bin/false" >> /etc/modprobe.d/usb-storage.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist usb-storage$" /etc/modprobe.d/usb-storage.conf ; then
	echo "blacklist usb-storage" >> /etc/modprobe.d/usb-storage.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled'

###############################################################################
# BEGIN fix (127 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_core_pattern'
###############################################################################
(>&2 echo "Remediating rule 127/252: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_core_pattern'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of kernel.core_pattern from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.core_pattern.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.core_pattern" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.core_pattern
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.core_pattern="|/bin/false"
fi

#
# If kernel.core_pattern present in /etc/sysctl.conf, change value to "|/bin/false"
#	else, add "kernel.core_pattern = |/bin/false" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.core_pattern")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "|/bin/false"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.core_pattern\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.core_pattern\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83961-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_core_pattern'

###############################################################################
# BEGIN fix (128 / 252) for 'xccdf_org.ssgproject.content_rule_coredump_disable_backtraces'
###############################################################################
(>&2 echo "Remediating rule 128/252: 'xccdf_org.ssgproject.content_rule_coredump_disable_backtraces'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q systemd; }; then

found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/systemd/coredump.conf.d/complianceascode_hardening.conf /etc/systemd/coredump.conf.d/*.conf /etc/systemd/coredump.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "[[:space:]]*\[Coredump\]([^\n\[]*\n+)+?[[:space:]]*ProcessSizeMax" "$f"; then
        if ! grep -qPz "ProcessSizeMax=0" "$f"; then

            sed -i "s/ProcessSizeMax[^(\n)]*/ProcessSizeMax=0/" "$f"

        fi

        found=true

    # find section and add key = value to it
    elif grep -qs "[[:space:]]*\[Coredump\]" "$f"; then

            sed -i "/[[:space:]]*\[Coredump\]/a ProcessSizeMax=0" "$f"

            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/systemd/coredump.conf.d/complianceascode_hardening.conf /etc/systemd/coredump.conf.d/*.conf /etc/systemd/coredump.conf" | cut -f1 -d ' ')
    mkdir -p "$(dirname "$file")"

    echo -e "[Coredump]\nProcessSizeMax=0" >> "$file"

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_coredump_disable_backtraces'

###############################################################################
# BEGIN fix (129 / 252) for 'xccdf_org.ssgproject.content_rule_coredump_disable_storage'
###############################################################################
(>&2 echo "Remediating rule 129/252: 'xccdf_org.ssgproject.content_rule_coredump_disable_storage'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q systemd; }; then

found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/systemd/coredump.conf.d/complianceascode_hardening.conf /etc/systemd/coredump.conf.d/*.conf /etc/systemd/coredump.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "[[:space:]]*\[Coredump\]([^\n\[]*\n+)+?[[:space:]]*Storage" "$f"; then
        if ! grep -qPz "Storage=none" "$f"; then

            sed -i "s/Storage[^(\n)]*/Storage=none/" "$f"

        fi

        found=true

    # find section and add key = value to it
    elif grep -qs "[[:space:]]*\[Coredump\]" "$f"; then

            sed -i "/[[:space:]]*\[Coredump\]/a Storage=none" "$f"

            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/systemd/coredump.conf.d/complianceascode_hardening.conf /etc/systemd/coredump.conf.d/*.conf /etc/systemd/coredump.conf" | cut -f1 -d ' ')
    mkdir -p "$(dirname "$file")"

    echo -e "[Coredump]\nStorage=none" >> "$file"

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_coredump_disable_storage'

###############################################################################
# BEGIN fix (130 / 252) for 'xccdf_org.ssgproject.content_rule_disable_users_coredumps'
###############################################################################
(>&2 echo "Remediating rule 130/252: 'xccdf_org.ssgproject.content_rule_disable_users_coredumps'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q pam; }; then

SECURITY_LIMITS_FILE="/etc/security/limits.conf"
DROPIN_DIR="/etc/security/limits.d"
DROPIN_FILE="$DROPIN_DIR/10-ssg-hardening.conf"
REGEX_CORRECT_VALUE="^\s*\*\s+hard\s+core\s+0\s*$"

# Remove bad configuration in drop-ins
if [ -d "$DROPIN_DIR" ]; then
    for override in "$DROPIN_DIR"/*.conf; do
        if [ -f "$override" ] && ! grep -qE "$REGEX_CORRECT_VALUE" "$override"; then
            sed -ir -E '/^[[:space:]]*\*[[:space:]]+hard[[:space:]]+core[[:space:]]+/ s/^/#/' "$override"
        fi
    done
fi

if [ -d "$DROPIN_DIR" ] && grep -qEr "$REGEX_CORRECT_VALUE" "$DROPIN_DIR"; then
    exit 0
elif [ ! -d "$DROPIN_DIR" ] && grep -qE "$REGEX_CORRECT_VALUE" "$SECURITY_LIMITS_FILE"; then
    exit 0
else
    mkdir -p "$DROPIN_DIR"
    echo "*     hard   core    0" >> $DROPIN_FILE
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_disable_users_coredumps'

###############################################################################
# BEGIN fix (131 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable'
###############################################################################
(>&2 echo "Remediating rule 131/252: 'xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of fs.suid_dumpable from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*fs.suid_dumpable.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.suid_dumpable" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for fs.suid_dumpable
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w fs.suid_dumpable="0"
fi

#
# If fs.suid_dumpable present in /etc/sysctl.conf, change value to "0"
#	else, add "fs.suid_dumpable = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.suid_dumpable")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.suid_dumpable\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.suid_dumpable\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83981-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable'

###############################################################################
# BEGIN fix (132 / 252) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space'
###############################################################################
(>&2 echo "Remediating rule 132/252: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

# Comment out any occurrences of kernel.randomize_va_space from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.randomize_va_space.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.randomize_va_space" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.randomize_va_space
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.randomize_va_space="2"
fi

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.randomize_va_space")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.randomize_va_space\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.randomize_va_space\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83971-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space'

###############################################################################
# BEGIN fix (133 / 252) for 'xccdf_org.ssgproject.content_rule_bios_enable_execution_restrictions'
###############################################################################
(>&2 echo "Remediating rule 133/252: 'xccdf_org.ssgproject.content_rule_bios_enable_execution_restrictions'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_bios_enable_execution_restrictions' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_bios_enable_execution_restrictions'

###############################################################################
# BEGIN fix (134 / 252) for 'xccdf_org.ssgproject.content_rule_package_libselinux_installed'
###############################################################################
(>&2 echo "Remediating rule 134/252: 'xccdf_org.ssgproject.content_rule_package_libselinux_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "libselinux" ; then
    dnf install -y "libselinux"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_libselinux_installed'

###############################################################################
# BEGIN fix (135 / 252) for 'xccdf_org.ssgproject.content_rule_grub2_enable_selinux'
###############################################################################
(>&2 echo "Remediating rule 135/252: 'xccdf_org.ssgproject.content_rule_grub2_enable_selinux'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q grub2-common; }; then

sed -i --follow-symlinks "s/selinux=0//gI" /etc/default/grub /etc/grub2.cfg /etc/grub.d/*
sed -i --follow-symlinks "s/enforcing=0//gI" /etc/default/grub /etc/grub2.cfg /etc/grub.d/*

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_grub2_enable_selinux'

###############################################################################
# BEGIN fix (136 / 252) for 'xccdf_org.ssgproject.content_rule_selinux_confinement_of_daemons'
###############################################################################
(>&2 echo "Remediating rule 136/252: 'xccdf_org.ssgproject.content_rule_selinux_confinement_of_daemons'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_selinux_confinement_of_daemons' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_selinux_confinement_of_daemons'

###############################################################################
# BEGIN fix (137 / 252) for 'xccdf_org.ssgproject.content_rule_selinux_policytype'
###############################################################################
(>&2 echo "Remediating rule 137/252: 'xccdf_org.ssgproject.content_rule_selinux_policytype'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_selinux_policy_name='targeted'

if [ -e "/etc/selinux/config" ] ; then
    
    LC_ALL=C sed -i "/^SELINUXTYPE=/Id" "/etc/selinux/config"
else
    touch "/etc/selinux/config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/selinux/config"

cp "/etc/selinux/config" "/etc/selinux/config.bak"
# Insert at the end of the file
printf '%s\n' "SELINUXTYPE=$var_selinux_policy_name" >> "/etc/selinux/config"
# Clean up after ourselves.
rm "/etc/selinux/config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_selinux_policytype'

###############################################################################
# BEGIN fix (138 / 252) for 'xccdf_org.ssgproject.content_rule_selinux_state'
###############################################################################
(>&2 echo "Remediating rule 138/252: 'xccdf_org.ssgproject.content_rule_selinux_state'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_selinux_state='enforcing'


if [ -e "/etc/selinux/config" ] ; then
    
    LC_ALL=C sed -i "/^SELINUX=/Id" "/etc/selinux/config"
else
    touch "/etc/selinux/config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/selinux/config"

cp "/etc/selinux/config" "/etc/selinux/config.bak"
# Insert at the end of the file
printf '%s\n' "SELINUX=$var_selinux_state" >> "/etc/selinux/config"
# Clean up after ourselves.
rm "/etc/selinux/config.bak"

fixfiles onboot

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_selinux_state'

###############################################################################
# BEGIN fix (139 / 252) for 'xccdf_org.ssgproject.content_rule_service_avahi-daemon_disabled'
###############################################################################
(>&2 echo "Remediating rule 139/252: 'xccdf_org.ssgproject.content_rule_service_avahi-daemon_disabled'"); (
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q avahi && rpm --quiet -q kernel-core ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'avahi-daemon.service'
fi
"$SYSTEMCTL_EXEC" disable 'avahi-daemon.service'
"$SYSTEMCTL_EXEC" mask 'avahi-daemon.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files avahi-daemon.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'avahi-daemon.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'avahi-daemon.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'avahi-daemon.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_service_avahi-daemon_disabled'

###############################################################################
# BEGIN fix (140 / 252) for 'xccdf_org.ssgproject.content_rule_package_cron_installed'
###############################################################################
(>&2 echo "Remediating rule 140/252: 'xccdf_org.ssgproject.content_rule_package_cron_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "cronie" ; then
    dnf install -y "cronie"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_cron_installed'

###############################################################################
# BEGIN fix (141 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_d'
###############################################################################
(>&2 echo "Remediating rule 141/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_d'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
find -P /etc/cron.d/ -maxdepth 0 -type d  ! -group 0 -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_d'

###############################################################################
# BEGIN fix (142 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_daily'
###############################################################################
(>&2 echo "Remediating rule 142/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_daily'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
find -P /etc/cron.daily/ -maxdepth 0 -type d  ! -group 0 -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_daily'

###############################################################################
# BEGIN fix (143 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly'
###############################################################################
(>&2 echo "Remediating rule 143/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
find -P /etc/cron.hourly/ -maxdepth 0 -type d  ! -group 0 -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly'

###############################################################################
# BEGIN fix (144 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly'
###############################################################################
(>&2 echo "Remediating rule 144/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
find -P /etc/cron.monthly/ -maxdepth 0 -type d  ! -group 0 -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly'

###############################################################################
# BEGIN fix (145 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly'
###############################################################################
(>&2 echo "Remediating rule 145/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
find -P /etc/cron.weekly/ -maxdepth 0 -type d  ! -group 0 -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly'

###############################################################################
# BEGIN fix (146 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_crontab'
###############################################################################
(>&2 echo "Remediating rule 146/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_crontab'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/crontab" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/crontab
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_crontab'

###############################################################################
# BEGIN fix (147 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_cron_d'
###############################################################################
(>&2 echo "Remediating rule 147/252: 'xccdf_org.ssgproject.content_rule_file_owner_cron_d'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/cron.d/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_cron_d'

###############################################################################
# BEGIN fix (148 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_cron_daily'
###############################################################################
(>&2 echo "Remediating rule 148/252: 'xccdf_org.ssgproject.content_rule_file_owner_cron_daily'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/cron.daily/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_cron_daily'

###############################################################################
# BEGIN fix (149 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_cron_hourly'
###############################################################################
(>&2 echo "Remediating rule 149/252: 'xccdf_org.ssgproject.content_rule_file_owner_cron_hourly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/cron.hourly/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_cron_hourly'

###############################################################################
# BEGIN fix (150 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_cron_monthly'
###############################################################################
(>&2 echo "Remediating rule 150/252: 'xccdf_org.ssgproject.content_rule_file_owner_cron_monthly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/cron.monthly/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_cron_monthly'

###############################################################################
# BEGIN fix (151 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_cron_weekly'
###############################################################################
(>&2 echo "Remediating rule 151/252: 'xccdf_org.ssgproject.content_rule_file_owner_cron_weekly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/cron.weekly/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_cron_weekly'

###############################################################################
# BEGIN fix (152 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_crontab'
###############################################################################
(>&2 echo "Remediating rule 152/252: 'xccdf_org.ssgproject.content_rule_file_owner_crontab'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/crontab" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/crontab
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_crontab'

###############################################################################
# BEGIN fix (153 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_d'
###############################################################################
(>&2 echo "Remediating rule 153/252: 'xccdf_org.ssgproject.content_rule_file_permissions_cron_d'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

find -H /etc/cron.d/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_d'

###############################################################################
# BEGIN fix (154 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_daily'
###############################################################################
(>&2 echo "Remediating rule 154/252: 'xccdf_org.ssgproject.content_rule_file_permissions_cron_daily'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

find -H /etc/cron.daily/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_daily'

###############################################################################
# BEGIN fix (155 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_hourly'
###############################################################################
(>&2 echo "Remediating rule 155/252: 'xccdf_org.ssgproject.content_rule_file_permissions_cron_hourly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

find -H /etc/cron.hourly/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_hourly'

###############################################################################
# BEGIN fix (156 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_monthly'
###############################################################################
(>&2 echo "Remediating rule 156/252: 'xccdf_org.ssgproject.content_rule_file_permissions_cron_monthly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

find -H /etc/cron.monthly/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_monthly'

###############################################################################
# BEGIN fix (157 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_weekly'
###############################################################################
(>&2 echo "Remediating rule 157/252: 'xccdf_org.ssgproject.content_rule_file_permissions_cron_weekly'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

find -H /etc/cron.weekly/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_weekly'

###############################################################################
# BEGIN fix (158 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_crontab'
###############################################################################
(>&2 echo "Remediating rule 158/252: 'xccdf_org.ssgproject.content_rule_file_permissions_crontab'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

chmod u-xs,g-xwrs,o-xwrt /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_crontab'

###############################################################################
# BEGIN fix (159 / 252) for 'xccdf_org.ssgproject.content_rule_file_at_deny_not_exist'
###############################################################################
(>&2 echo "Remediating rule 159/252: 'xccdf_org.ssgproject.content_rule_file_at_deny_not_exist'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if [[ -f  /etc/at.deny ]]; then
        rm /etc/at.deny
    fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_at_deny_not_exist'

###############################################################################
# BEGIN fix (160 / 252) for 'xccdf_org.ssgproject.content_rule_file_cron_deny_not_exist'
###############################################################################
(>&2 echo "Remediating rule 160/252: 'xccdf_org.ssgproject.content_rule_file_cron_deny_not_exist'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if [[ -f  /etc/cron.deny ]]; then
        rm /etc/cron.deny
    fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_cron_deny_not_exist'

###############################################################################
# BEGIN fix (161 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_at_allow'
###############################################################################
(>&2 echo "Remediating rule 161/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_at_allow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/at.allow" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/at.allow
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_at_allow'

###############################################################################
# BEGIN fix (162 / 252) for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_allow'
###############################################################################
(>&2 echo "Remediating rule 162/252: 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_allow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/cron.allow" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/cron.allow
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_cron_allow'

###############################################################################
# BEGIN fix (163 / 252) for 'xccdf_org.ssgproject.content_rule_file_owner_cron_allow'
###############################################################################
(>&2 echo "Remediating rule 163/252: 'xccdf_org.ssgproject.content_rule_file_owner_cron_allow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/cron.allow" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/cron.allow
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_owner_cron_allow'

###############################################################################
# BEGIN fix (164 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_at_allow'
###############################################################################
(>&2 echo "Remediating rule 164/252: 'xccdf_org.ssgproject.content_rule_file_permissions_at_allow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

chmod u-xs,g-xws,o-xwrt /etc/at.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_at_allow'

###############################################################################
# BEGIN fix (165 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_allow'
###############################################################################
(>&2 echo "Remediating rule 165/252: 'xccdf_org.ssgproject.content_rule_file_permissions_cron_allow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

chmod u-xs,g-xwrs,o-xwrt /etc/cron.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_cron_allow'

###############################################################################
# BEGIN fix (166 / 252) for 'xccdf_org.ssgproject.content_rule_package_dhcp_removed'
###############################################################################
(>&2 echo "Remediating rule 166/252: 'xccdf_org.ssgproject.content_rule_package_dhcp_removed'"); (

# CAUTION: This remediation script will remove dhcp-server
# from the system, and may remove any packages
# that depend on dhcp-server. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "dhcp-server" ; then
dnf remove -y --noautoremove "dhcp-server"
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_dhcp_removed'

###############################################################################
# BEGIN fix (167 / 252) for 'xccdf_org.ssgproject.content_rule_package_ftp_removed'
###############################################################################
(>&2 echo "Remediating rule 167/252: 'xccdf_org.ssgproject.content_rule_package_ftp_removed'"); (

# CAUTION: This remediation script will remove ftp
# from the system, and may remove any packages
# that depend on ftp. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "ftp" ; then
dnf remove -y --noautoremove "ftp"
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_ftp_removed'

###############################################################################
# BEGIN fix (168 / 252) for 'xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled'
###############################################################################
(>&2 echo "Remediating rule 168/252: 'xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q postfix; }; then

var_postfix_inet_interfaces='loopback-only'


if [ -e "/etc/postfix/main.cf" ] ; then
    
    LC_ALL=C sed -i "/^\s*inet_interfaces\s\+=\s\+/Id" "/etc/postfix/main.cf"
else
    touch "/etc/postfix/main.cf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/postfix/main.cf"

cp "/etc/postfix/main.cf" "/etc/postfix/main.cf.bak"
# Insert at the end of the file
printf '%s\n' "inet_interfaces=$var_postfix_inet_interfaces" >> "/etc/postfix/main.cf"
# Clean up after ourselves.
rm "/etc/postfix/main.cf.bak"

systemctl restart postfix

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled'

###############################################################################
# BEGIN fix (169 / 252) for 'xccdf_org.ssgproject.content_rule_service_rpcbind_disabled'
###############################################################################
(>&2 echo "Remediating rule 169/252: 'xccdf_org.ssgproject.content_rule_service_rpcbind_disabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'rpcbind.service'
fi
"$SYSTEMCTL_EXEC" disable 'rpcbind.service'
"$SYSTEMCTL_EXEC" mask 'rpcbind.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files rpcbind.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'rpcbind.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'rpcbind.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'rpcbind.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_service_rpcbind_disabled'

###############################################################################
# BEGIN fix (170 / 252) for 'xccdf_org.ssgproject.content_rule_package_chrony_installed'
###############################################################################
(>&2 echo "Remediating rule 170/252: 'xccdf_org.ssgproject.content_rule_package_chrony_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "chrony" ; then
    dnf install -y "chrony"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_chrony_installed'

###############################################################################
# BEGIN fix (171 / 252) for 'xccdf_org.ssgproject.content_rule_chronyd_specify_remote_server'
###############################################################################
(>&2 echo "Remediating rule 171/252: 'xccdf_org.ssgproject.content_rule_chronyd_specify_remote_server'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q chrony; }; then

var_multiple_time_servers='0.pool.ntp.org,1.pool.ntp.org,2.pool.ntp.org,3.pool.ntp.org'


config_file="/etc/chrony.conf"

if ! grep -q '^[[:space:]]*\(server\|pool\)[[:space:]]\+[[:graph:]]\+' "$config_file" ; then
  if ! grep -q '#[[:space:]]*server' "$config_file" ; then
    for server in $(echo "$var_multiple_time_servers" | tr ',' '\n') ; do
      printf '\nserver %s' "$server" >> "$config_file"
    done
  else
    sed -i 's/#[ \t]*server/server/g' "$config_file"
  fi
  if [[ -s "$config_file" ]] && [[ -n "$(tail -c 1 -- "$config_file" || true)" ]]; then
      LC_ALL=C sed -i --follow-symlinks '$a'\\ "$config_file"
  fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_chronyd_specify_remote_server'

###############################################################################
# BEGIN fix (172 / 252) for 'xccdf_org.ssgproject.content_rule_chronyd_run_as_chrony_user'
###############################################################################
(>&2 echo "Remediating rule 172/252: 'xccdf_org.ssgproject.content_rule_chronyd_run_as_chrony_user'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q chrony; }; then

if grep -q 'OPTIONS=.*' /etc/sysconfig/chronyd; then
	# trying to solve cases where the parameter after OPTIONS
	#may or may not be enclosed in quotes
	sed -i -E -e 's/\s*-u\s*\w+\s*/ /' -e 's/^([\s]*OPTIONS=["]?[^"]*)("?)/\1\2/' /etc/sysconfig/chronyd
fi

if grep -q 'OPTIONS=.*' /etc/sysconfig/chronyd; then
	# trying to solve cases where the parameter after OPTIONS
	#may or may not be enclosed in quotes
	sed -i -E -e 's/\s*-u\s*\w+\s*/ /' -e 's/^([\s]*OPTIONS=["]?[^"]*)("?)/\1 -u chrony\2/' /etc/sysconfig/chronyd
else
	echo 'OPTIONS="-u chrony"' >> /etc/sysconfig/chronyd
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_chronyd_run_as_chrony_user'

###############################################################################
# BEGIN fix (173 / 252) for 'xccdf_org.ssgproject.content_rule_service_rsyncd_disabled'
###############################################################################
(>&2 echo "Remediating rule 173/252: 'xccdf_org.ssgproject.content_rule_service_rsyncd_disabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'rsyncd.service'
fi
"$SYSTEMCTL_EXEC" disable 'rsyncd.service'
"$SYSTEMCTL_EXEC" mask 'rsyncd.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files rsyncd.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'rsyncd.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'rsyncd.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'rsyncd.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_service_rsyncd_disabled'

###############################################################################
# BEGIN fix (174 / 252) for 'xccdf_org.ssgproject.content_rule_package_telnet-server_removed'
###############################################################################
(>&2 echo "Remediating rule 174/252: 'xccdf_org.ssgproject.content_rule_package_telnet-server_removed'"); (

# CAUTION: This remediation script will remove telnet-server
# from the system, and may remove any packages
# that depend on telnet-server. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "telnet-server" ; then
dnf remove -y --noautoremove "telnet-server"
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_telnet-server_removed'

###############################################################################
# BEGIN fix (175 / 252) for 'xccdf_org.ssgproject.content_rule_package_telnet_removed'
###############################################################################
(>&2 echo "Remediating rule 175/252: 'xccdf_org.ssgproject.content_rule_package_telnet_removed'"); (

# CAUTION: This remediation script will remove telnet
# from the system, and may remove any packages
# that depend on telnet. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "telnet" ; then
dnf remove -y --noautoremove "telnet"
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_telnet_removed'

###############################################################################
# BEGIN fix (176 / 252) for 'xccdf_org.ssgproject.content_rule_package_tftp-server_removed'
###############################################################################
(>&2 echo "Remediating rule 176/252: 'xccdf_org.ssgproject.content_rule_package_tftp-server_removed'"); (

# CAUTION: This remediation script will remove tftp-server
# from the system, and may remove any packages
# that depend on tftp-server. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "tftp-server" ; then
dnf remove -y --noautoremove "tftp-server"
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_tftp-server_removed'

###############################################################################
# BEGIN fix (177 / 252) for 'xccdf_org.ssgproject.content_rule_package_tftp_removed'
###############################################################################
(>&2 echo "Remediating rule 177/252: 'xccdf_org.ssgproject.content_rule_package_tftp_removed'"); (

# CAUTION: This remediation script will remove tftp
# from the system, and may remove any packages
# that depend on tftp. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "tftp" ; then
dnf remove -y --noautoremove "tftp"
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_tftp_removed'

###############################################################################
# BEGIN fix (178 / 252) for 'xccdf_org.ssgproject.content_rule_package_net-snmp_removed'
###############################################################################
(>&2 echo "Remediating rule 178/252: 'xccdf_org.ssgproject.content_rule_package_net-snmp_removed'"); (

# CAUTION: This remediation script will remove net-snmp
# from the system, and may remove any packages
# that depend on net-snmp. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "net-snmp" ; then
dnf remove -y --noautoremove "net-snmp"
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_net-snmp_removed'

###############################################################################
# BEGIN fix (179 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_config'
###############################################################################
(>&2 echo "Remediating rule 179/252: 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_config'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

chmod u-xs,g-xwrs,o-xwrt /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_config'

###############################################################################
# BEGIN fix (180 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key'
###############################################################################
(>&2 echo "Remediating rule 180/252: 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

for keyfile in /etc/ssh/*_key; do
    test -f "$keyfile" || continue
    if test root:root = "$(stat -c "%U:%G" "$keyfile")"; then
    
	chmod u-xs,g-xwrs,o-xwrt "$keyfile"
    
    elif test root:ssh_keys = "$(stat -c "%U:%G" "$keyfile")"; then
	chmod u-xs,g-xws,o-xwrt "$keyfile"
    else
        echo "Key-like file '$keyfile' is owned by an unexpected user:group combination"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key'

###############################################################################
# BEGIN fix (181 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key'
###############################################################################
(>&2 echo "Remediating rule 181/252: 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

find -P /etc/ssh/ -maxdepth 1 -perm /u+xs,g+xws,o+xwt  -type f -regextype posix-extended -regex '^.*\.pub$' -exec chmod u-xs,g-xws,o-xwt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key'

###############################################################################
# BEGIN fix (182 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_set_keepalive'
###############################################################################
(>&2 echo "Remediating rule 182/252: 'xccdf_org.ssgproject.content_rule_sshd_set_keepalive'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_sshd_set_keepalive='1'


mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_keepalive'

###############################################################################
# BEGIN fix (183 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout'
###############################################################################
(>&2 echo "Remediating rule 183/252: 'xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

sshd_idle_timeout_value='900'


mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout'

###############################################################################
# BEGIN fix (184 / 252) for 'xccdf_org.ssgproject.content_rule_disable_host_auth'
###############################################################################
(>&2 echo "Remediating rule 184/252: 'xccdf_org.ssgproject.content_rule_disable_host_auth'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
chmod 0600 /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "HostbasedAuthentication no" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
cat "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_disable_host_auth'

###############################################################################
# BEGIN fix (185 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords'
###############################################################################
(>&2 echo "Remediating rule 185/252: 'xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
chmod 0600 /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitEmptyPasswords no" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
cat "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords'

###############################################################################
# BEGIN fix (186 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_disable_rhosts'
###############################################################################
(>&2 echo "Remediating rule 186/252: 'xccdf_org.ssgproject.content_rule_sshd_disable_rhosts'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
chmod 0600 /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "IgnoreRhosts yes" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
cat "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_rhosts'

###############################################################################
# BEGIN fix (187 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'
###############################################################################
(>&2 echo "Remediating rule 187/252: 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*PermitRootLogin\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*PermitRootLogin\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitRootLogin\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitRootLogin no" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'

###############################################################################
# BEGIN fix (188 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_disable_tcp_forwarding'
###############################################################################
(>&2 echo "Remediating rule 188/252: 'xccdf_org.ssgproject.content_rule_sshd_disable_tcp_forwarding'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*AllowTcpForwarding\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*AllowTcpForwarding\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*AllowTcpForwarding\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "AllowTcpForwarding no" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_tcp_forwarding'

###############################################################################
# BEGIN fix (189 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_disable_x11_forwarding'
###############################################################################
(>&2 echo "Remediating rule 189/252: 'xccdf_org.ssgproject.content_rule_sshd_disable_x11_forwarding'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
chmod 0600 /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "X11Forwarding no" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
cat "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_x11_forwarding'

###############################################################################
# BEGIN fix (190 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env'
###############################################################################
(>&2 echo "Remediating rule 190/252: 'xccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
chmod 0600 /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitUserEnvironment no" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
cat "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env'

###############################################################################
# BEGIN fix (191 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_enable_pam'
###############################################################################
(>&2 echo "Remediating rule 191/252: 'xccdf_org.ssgproject.content_rule_sshd_enable_pam'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*UsePAM\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*UsePAM\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*UsePAM\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "UsePAM yes" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_enable_pam'

###############################################################################
# BEGIN fix (192 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_limit_user_access'
###############################################################################
(>&2 echo "Remediating rule 192/252: 'xccdf_org.ssgproject.content_rule_sshd_limit_user_access'"); (
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_sshd_limit_user_access' IS MISSING!")

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_limit_user_access'

###############################################################################
# BEGIN fix (193 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_set_login_grace_time'
###############################################################################
(>&2 echo "Remediating rule 193/252: 'xccdf_org.ssgproject.content_rule_sshd_set_login_grace_time'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_sshd_set_login_grace_time='60'


mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*LoginGraceTime\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*LoginGraceTime\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*LoginGraceTime\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "LoginGraceTime $var_sshd_set_login_grace_time" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_login_grace_time'

###############################################################################
# BEGIN fix (194 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_set_loglevel_verbose'
###############################################################################
(>&2 echo "Remediating rule 194/252: 'xccdf_org.ssgproject.content_rule_sshd_set_loglevel_verbose'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "LogLevel VERBOSE" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_loglevel_verbose'

###############################################################################
# BEGIN fix (195 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_set_max_auth_tries'
###############################################################################
(>&2 echo "Remediating rule 195/252: 'xccdf_org.ssgproject.content_rule_sshd_set_max_auth_tries'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

sshd_max_auth_tries_value='4'


mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*MaxAuthTries\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*MaxAuthTries\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxAuthTries\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "MaxAuthTries $sshd_max_auth_tries_value" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_max_auth_tries'

###############################################################################
# BEGIN fix (196 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_set_max_sessions'
###############################################################################
(>&2 echo "Remediating rule 196/252: 'xccdf_org.ssgproject.content_rule_sshd_set_max_sessions'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_sshd_max_sessions='10'


mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*MaxSessions\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*MaxSessions\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxSessions\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "MaxSessions $var_sshd_max_sessions" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_max_sessions'

###############################################################################
# BEGIN fix (197 / 252) for 'xccdf_org.ssgproject.content_rule_sshd_set_maxstartups'
###############################################################################
(>&2 echo "Remediating rule 197/252: 'xccdf_org.ssgproject.content_rule_sshd_set_maxstartups'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

var_sshd_set_maxstartups='10:30:100'


mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*MaxStartups\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*MaxStartups\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxStartups\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "MaxStartups $var_sshd_set_maxstartups" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_maxstartups'

###############################################################################
# BEGIN fix (198 / 252) for 'xccdf_org.ssgproject.content_rule_package_audispd-plugins_installed'
###############################################################################
(>&2 echo "Remediating rule 198/252: 'xccdf_org.ssgproject.content_rule_package_audispd-plugins_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "audispd-plugins" ; then
    dnf install -y "audispd-plugins"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_audispd-plugins_installed'

###############################################################################
# BEGIN fix (199 / 252) for 'xccdf_org.ssgproject.content_rule_package_audit_installed'
###############################################################################
(>&2 echo "Remediating rule 199/252: 'xccdf_org.ssgproject.content_rule_package_audit_installed'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core; then

if ! rpm -q --quiet "audit" ; then
    dnf install -y "audit"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_package_audit_installed'

###############################################################################
# BEGIN fix (200 / 252) for 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'
###############################################################################
(>&2 echo "Remediating rule 200/252: 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q audit; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'auditd.service'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'auditd.service'
fi
"$SYSTEMCTL_EXEC" enable 'auditd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'

###############################################################################
# BEGIN fix (201 / 252) for 'xccdf_org.ssgproject.content_rule_grub2_audit_argument'
###############################################################################
(>&2 echo "Remediating rule 201/252: 'xccdf_org.ssgproject.content_rule_grub2_audit_argument'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q grub2-common; }; then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "audit" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"audit=[^\"]*\"(.*]\s*)/\1\"audit=1\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"audit=1\"]" >> "$KARGS_DIR/10-audit.toml"
    fi
else

    grubby --update-kernel=ALL --args=audit=1

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_grub2_audit_argument'

###############################################################################
# BEGIN fix (202 / 252) for 'xccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument'
###############################################################################
(>&2 echo "Remediating rule 202/252: 'xccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel-core && { rpm --quiet -q grub2-common; }; then

var_audit_backlog_limit='8192'



if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "audit_backlog_limit" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"audit_backlog_limit=[^\"]*\"(.*]\s*)/\1\"audit_backlog_limit=$var_audit_backlog_limit\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"audit_backlog_limit=$var_audit_backlog_limit\"]" >> "$KARGS_DIR/10-audit_backlog_limit.toml"
    fi
else

    grubby --update-kernel=ALL --args=audit_backlog_limit=$var_audit_backlog_limit

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument'

###############################################################################
# BEGIN fix (203 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_immutable'
###############################################################################
(>&2 echo "Remediating rule 203/252: 'xccdf_org.ssgproject.content_rule_audit_rules_immutable'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Traverse all of:
#
# /etc/audit/audit.rules,			(for auditctl case)
# /etc/audit/rules.d/*.rules			(for augenrules case)
#
# files to check if '-e .*' setting is present in that '*.rules' file already.
# If found, delete such occurrence since auditctl(8) manual page instructs the
# '-e 2' rule should be placed as the last rule in the configuration
find /etc/audit /etc/audit/rules.d -maxdepth 1 -type f -name '*.rules' -exec sed -i '/-e[[:space:]]\+.*/d' {} ';'

# Append '-e 2' requirement at the end of both:
# * /etc/audit/audit.rules file 		(for auditctl case)
# * /etc/audit/rules.d/immutable.rules		(for augenrules case)

for AUDIT_FILE in "/etc/audit/audit.rules" "/etc/audit/rules.d/immutable.rules"
do
	echo '' >> $AUDIT_FILE
	echo '# Set the audit.rules configuration immutable per security requirements' >> $AUDIT_FILE
	echo '# Reboot is required to change audit rules once this setting is applied' >> $AUDIT_FILE
	echo '-e 2' >> $AUDIT_FILE
	chmod o-rwx $AUDIT_FILE
	chmod g-rwx $AUDIT_FILE
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_immutable'

###############################################################################
# BEGIN fix (204 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_mac_modification'
###############################################################################
(>&2 echo "Remediating rule 204/252: 'xccdf_org.ssgproject.content_rule_audit_rules_mac_modification'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/selinux/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/selinux/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/selinux/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/selinux/ -p wa -k MAC-policy" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/MAC-policy.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/selinux/" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/MAC-policy.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/MAC-policy.rules"
    # If the MAC-policy.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/selinux/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/selinux/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/selinux/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/selinux/ -p wa -k MAC-policy" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_mac_modification'

###############################################################################
# BEGIN fix (205 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_media_export'
###############################################################################
(>&2 echo "Remediating rule 205/252: 'xccdf_org.ssgproject.content_rule_audit_rules_media_export'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="mount"
	KEY="export"
	SYSCALL_GROUPING=""

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_media_export'

###############################################################################
# BEGIN fix (206 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_networkconfig_modification'
###############################################################################
(>&2 echo "Remediating rule 206/252: 'xccdf_org.ssgproject.content_rule_audit_rules_networkconfig_modification'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS=""
	SYSCALL="sethostname setdomainname"
	KEY="audit_rules_networkconfig_modification"
	SYSCALL_GROUPING="sethostname setdomainname"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

# Then perform the remediations for the watch rules
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/issue" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue.net" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue.net $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue.net$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/issue.net" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue.net" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue.net $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue.net$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/hosts" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/hosts $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/hosts$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/hosts -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/hosts" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/hosts" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/hosts $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/hosts$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/hosts -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/sysconfig/network" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sysconfig/network $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/sysconfig/network$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/sysconfig/network" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/sysconfig/network" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sysconfig/network $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/sysconfig/network$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_networkconfig_modification'

###############################################################################
# BEGIN fix (207 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_btmp'
###############################################################################
(>&2 echo "Remediating rule 207/252: 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_btmp'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/btmp" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/btmp $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/btmp$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/btmp -p wa -k session" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/session.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/var/log/btmp" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/session.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/session.rules"
    # If the session.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/btmp" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/btmp $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/btmp$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/btmp -p wa -k session" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_btmp'

###############################################################################
# BEGIN fix (208 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_utmp'
###############################################################################
(>&2 echo "Remediating rule 208/252: 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_utmp'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/run/utmp" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/run/utmp $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/run/utmp$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/run/utmp -p wa -k session" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/session.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/var/run/utmp" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/session.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/session.rules"
    # If the session.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/run/utmp" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/run/utmp $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/run/utmp$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/run/utmp -p wa -k session" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_utmp'

###############################################################################
# BEGIN fix (209 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_wtmp'
###############################################################################
(>&2 echo "Remediating rule 209/252: 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_wtmp'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/wtmp" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/wtmp $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/wtmp$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/wtmp -p wa -k session" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/session.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/var/log/wtmp" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/session.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/session.rules"
    # If the session.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/wtmp" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/wtmp $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/wtmp$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/wtmp -p wa -k session" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_session_events_wtmp'

###############################################################################
# BEGIN fix (210 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_suid_privilege_function'
###############################################################################
(>&2 echo "Remediating rule 210/252: 'xccdf_org.ssgproject.content_rule_audit_rules_suid_privilege_function'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
    
	OTHER_FILTERS="-C uid!=euid -F euid=0"
	
	AUID_FILTERS=""
	SYSCALL="execve"
    
	KEY="setuid"
	
	SYSCALL_GROUPING=""
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
    
	OTHER_FILTERS="-C gid!=egid -F egid=0"
	
	AUID_FILTERS=""
	SYSCALL="execve"
    
	KEY="setgid"
	
	SYSCALL_GROUPING=""
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_suid_privilege_function'

###############################################################################
# BEGIN fix (211 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_sysadmin_actions'
###############################################################################
(>&2 echo "Remediating rule 211/252: 'xccdf_org.ssgproject.content_rule_audit_rules_sysadmin_actions'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'


# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/sudoers$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/sudoers -p wa -k actions" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/actions.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/sudoers" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/actions.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/actions.rules"
    # If the actions.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/sudoers$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/sudoers -p wa -k actions" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers.d/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers.d/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/sudoers.d/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/sudoers.d/ -p wa -k actions" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/actions.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/sudoers.d/" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/actions.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/actions.rules"
    # If the actions.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers.d/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers.d/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/sudoers.d/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/sudoers.d/ -p wa -k actions" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_sysadmin_actions'

###############################################################################
# BEGIN fix (212 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_group'
###############################################################################
(>&2 echo "Remediating rule 212/252: 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_group'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/group" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/group $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/group$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/group -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/group" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/group" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/group $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/group$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/group -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_group'

###############################################################################
# BEGIN fix (213 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_gshadow'
###############################################################################
(>&2 echo "Remediating rule 213/252: 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_gshadow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/gshadow" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/gshadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/gshadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/gshadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/gshadow" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/gshadow" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/gshadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/gshadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/gshadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_gshadow'

###############################################################################
# BEGIN fix (214 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_opasswd'
###############################################################################
(>&2 echo "Remediating rule 214/252: 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_opasswd'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/security/opasswd" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/security/opasswd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/security/opasswd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/security/opasswd" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/security/opasswd" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/security/opasswd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/security/opasswd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_opasswd'

###############################################################################
# BEGIN fix (215 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_passwd'
###############################################################################
(>&2 echo "Remediating rule 215/252: 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_passwd'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/passwd" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/passwd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/passwd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/passwd -p wa -k audit_rules_usergroup_modification_passwd" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification_passwd.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/passwd" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification_passwd.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification_passwd.rules"
    # If the audit_rules_usergroup_modification_passwd.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/passwd" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/passwd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/passwd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/passwd -p wa -k audit_rules_usergroup_modification_passwd" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_passwd'

###############################################################################
# BEGIN fix (216 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_shadow'
###############################################################################
(>&2 echo "Remediating rule 216/252: 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_shadow'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/shadow" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/shadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/shadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/shadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/shadow" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/shadow" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/shadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/shadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/shadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_shadow'

###############################################################################
# BEGIN fix (217 / 252) for 'xccdf_org.ssgproject.content_rule_audit_sudo_log_events'
###############################################################################
(>&2 echo "Remediating rule 217/252: 'xccdf_org.ssgproject.content_rule_audit_sudo_log_events'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/sudo.log" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/sudo.log $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/sudo.log$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/sudo.log -p wa -k maintenance" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/maintenance.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/var/log/sudo.log" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/maintenance.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/maintenance.rules"
    # If the maintenance.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/sudo.log" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/sudo.log $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/sudo.log$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/sudo.log -p wa -k maintenance" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_sudo_log_events'

###############################################################################
# BEGIN fix (218 / 252) for 'xccdf_org.ssgproject.content_rule_directory_access_var_log_audit'
###############################################################################
(>&2 echo "Remediating rule 218/252: 'xccdf_org.ssgproject.content_rule_directory_access_var_log_audit'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

OTHER_FILTERS="-F dir=/var/log/audit/ -F perm=r"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="access-audit-trail"
SYSCALL_GROUPING=""
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
    ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
    unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
    unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_directory_access_var_log_audit'

###############################################################################
# BEGIN fix (219 / 252) for 'xccdf_org.ssgproject.content_rule_file_group_ownership_var_log_audit'
###############################################################################
(>&2 echo "Remediating rule 219/252: 'xccdf_org.ssgproject.content_rule_file_group_ownership_var_log_audit'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

if LC_ALL=C grep -iw log_file /etc/audit/auditd.conf; then
  FILE=$(awk -F "=" '/^log_file/ {print $2}' /etc/audit/auditd.conf | tr -d ' ')
else
  FILE="/var/log/audit/audit.log"
fi


if LC_ALL=C grep -m 1 -q ^log_group /etc/audit/auditd.conf; then
  GROUP=$(awk -F "=" '/log_group/ {print $2}' /etc/audit/auditd.conf | tr -d ' ')
    if ! [ "${GROUP}" == 'root' ]; then
      chgrp ${GROUP} $FILE*
    else
      chgrp root $FILE*
    fi
else
  chgrp root $FILE*
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_group_ownership_var_log_audit'

###############################################################################
# BEGIN fix (220 / 252) for 'xccdf_org.ssgproject.content_rule_file_ownership_var_log_audit'
###############################################################################
(>&2 echo "Remediating rule 220/252: 'xccdf_org.ssgproject.content_rule_file_ownership_var_log_audit'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

if LC_ALL=C grep -m 1 -q ^log_group /etc/audit/auditd.conf; then
  GROUP=$(awk -F "=" '/log_group/ {print $2}' /etc/audit/auditd.conf | tr -d ' ')
  if ! [ "${GROUP}" == 'root' ] ; then
    chown root:${GROUP} /var/log/audit
    chown root:${GROUP} /var/log/audit/audit.log*
  else
    chown root:root /var/log/audit
    chown root:root /var/log/audit/audit.log*
  fi
else
  chown root:root /var/log/audit
  chown root:root /var/log/audit/audit.log*
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_ownership_var_log_audit'

###############################################################################
# BEGIN fix (221 / 252) for 'xccdf_org.ssgproject.content_rule_file_permissions_var_log_audit'
###############################################################################
(>&2 echo "Remediating rule 221/252: 'xccdf_org.ssgproject.content_rule_file_permissions_var_log_audit'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

if LC_ALL=C grep -iw ^log_file /etc/audit/auditd.conf; then
    FILE=$(awk -F "=" '/^log_file/ {print $2}' /etc/audit/auditd.conf | tr -d ' ')
else
    FILE="/var/log/audit/audit.log"
fi


chmod 0600 $FILE

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_var_log_audit'

###############################################################################
# BEGIN fix (222 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chmod'
###############################################################################
(>&2 echo "Remediating rule 222/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chmod'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core && { ! ( ( grep -sqE "^.*\.aarch64$" /proc/sys/kernel/osrelease || grep -sqE "^aarch64$" /proc/sys/kernel/arch; ) ); }; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="chmod"
	KEY="perm_mod"
	SYSCALL_GROUPING="chmod fchmod fchmodat"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chmod'

###############################################################################
# BEGIN fix (223 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chown'
###############################################################################
(>&2 echo "Remediating rule 223/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chown'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core && { ! ( ( grep -sqE "^.*\.aarch64$" /proc/sys/kernel/osrelease || grep -sqE "^aarch64$" /proc/sys/kernel/arch; ) ); }; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="chown"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chown'

###############################################################################
# BEGIN fix (224 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmod'
###############################################################################
(>&2 echo "Remediating rule 224/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmod'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchmod"
	KEY="perm_mod"
	SYSCALL_GROUPING="chmod fchmod fchmodat"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmod'

###############################################################################
# BEGIN fix (225 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmodat'
###############################################################################
(>&2 echo "Remediating rule 225/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmodat'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchmodat"
	KEY="perm_mod"
	SYSCALL_GROUPING="chmod fchmod fchmodat"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmodat'

###############################################################################
# BEGIN fix (226 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchown'
###############################################################################
(>&2 echo "Remediating rule 226/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchown'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchown"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchown'

###############################################################################
# BEGIN fix (227 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchownat'
###############################################################################
(>&2 echo "Remediating rule 227/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchownat'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchownat"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchownat'

###############################################################################
# BEGIN fix (228 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fremovexattr'
###############################################################################
(>&2 echo "Remediating rule 228/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fremovexattr'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="fremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fremovexattr'

###############################################################################
# BEGIN fix (229 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fsetxattr'
###############################################################################
(>&2 echo "Remediating rule 229/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fsetxattr'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="fsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fsetxattr'

###############################################################################
# BEGIN fix (230 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lchown'
###############################################################################
(>&2 echo "Remediating rule 230/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lchown'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core && { ! ( ( grep -sqE "^.*\.aarch64$" /proc/sys/kernel/osrelease || grep -sqE "^aarch64$" /proc/sys/kernel/arch; ) ); }; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="lchown"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lchown'

###############################################################################
# BEGIN fix (231 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lremovexattr'
###############################################################################
(>&2 echo "Remediating rule 231/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lremovexattr'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="lremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="lremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lremovexattr'

###############################################################################
# BEGIN fix (232 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lsetxattr'
###############################################################################
(>&2 echo "Remediating rule 232/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lsetxattr'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="lsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="lsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lsetxattr'

###############################################################################
# BEGIN fix (233 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_removexattr'
###############################################################################
(>&2 echo "Remediating rule 233/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_removexattr'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="removexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="removexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_removexattr'

###############################################################################
# BEGIN fix (234 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_setxattr'
###############################################################################
(>&2 echo "Remediating rule 234/252: 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_setxattr'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="setxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="setxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_setxattr'

###############################################################################
# BEGIN fix (235 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rename'
###############################################################################
(>&2 echo "Remediating rule 235/252: 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rename'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core && { ! ( ( grep -sqE "^.*\.aarch64$" /proc/sys/kernel/osrelease || grep -sqE "^aarch64$" /proc/sys/kernel/arch; ) ); }; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="rename"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat renameat2 rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rename'

###############################################################################
# BEGIN fix (236 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_renameat'
###############################################################################
(>&2 echo "Remediating rule 236/252: 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_renameat'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="renameat"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat renameat2 rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_renameat'

###############################################################################
# BEGIN fix (237 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rmdir'
###############################################################################
(>&2 echo "Remediating rule 237/252: 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rmdir'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core && { ! ( ( grep -sqE "^.*\.aarch64$" /proc/sys/kernel/osrelease || grep -sqE "^aarch64$" /proc/sys/kernel/arch; ) ); }; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="rmdir"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat renameat2 rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rmdir'

###############################################################################
# BEGIN fix (238 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlink'
###############################################################################
(>&2 echo "Remediating rule 238/252: 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlink'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core && { ! ( ( grep -sqE "^.*\.aarch64$" /proc/sys/kernel/osrelease || grep -sqE "^aarch64$" /proc/sys/kernel/arch; ) ); }; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="unlink"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat renameat2 rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlink'

###############################################################################
# BEGIN fix (239 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlinkat'
###############################################################################
(>&2 echo "Remediating rule 239/252: 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlinkat'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="unlinkat"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat renameat2 rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlinkat'

###############################################################################
# BEGIN fix (240 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_faillock'
###############################################################################
(>&2 echo "Remediating rule 240/252: 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_faillock'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'


var_accounts_passwords_pam_faillock_dir='/var/log/faillock'





# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+${var_accounts_passwords_pam_faillock_dir}" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+${var_accounts_passwords_pam_faillock_dir} $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+${var_accounts_passwords_pam_faillock_dir}$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w ${var_accounts_passwords_pam_faillock_dir} -p wa -k logins" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/logins.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+${var_accounts_passwords_pam_faillock_dir}" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/logins.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/logins.rules"
    # If the logins.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+${var_accounts_passwords_pam_faillock_dir}" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+${var_accounts_passwords_pam_faillock_dir} $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+${var_accounts_passwords_pam_faillock_dir}$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w ${var_accounts_passwords_pam_faillock_dir} -p wa -k logins" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_faillock'

###############################################################################
# BEGIN fix (241 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_lastlog'
###############################################################################
(>&2 echo "Remediating rule 241/252: 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_lastlog'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/lastlog" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/lastlog $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/lastlog$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/lastlog -p wa -k logins" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/logins.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/var/log/lastlog" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/logins.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/logins.rules"
    # If the logins.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/lastlog" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/lastlog $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/lastlog$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/lastlog -p wa -k logins" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_lastlog'

###############################################################################
# BEGIN fix (242 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_tallylog'
###############################################################################
(>&2 echo "Remediating rule 242/252: 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_tallylog'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/tallylog" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/tallylog $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/tallylog$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/tallylog -p wa -k logins" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/logins.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/var/log/tallylog" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/logins.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/logins.rules"
    # If the logins.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/var/log/tallylog" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/var/log/tallylog $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/var/log/tallylog$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /var/log/tallylog -p wa -k logins" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_login_events_tallylog'

###############################################################################
# BEGIN fix (243 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_time_adjtimex'
###############################################################################
(>&2 echo "Remediating rule 243/252: 'xccdf_org.ssgproject.content_rule_audit_rules_time_adjtimex'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
    # Create expected audit group and audit rule form for particular system call & architecture
    if [ ${ARCH} = "b32" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
        # so append it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday stime"
        SYSCALL_GROUPING="adjtimex settimeofday stime"
    elif [ ${ARCH} = "b64" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
        # therefore don't add it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday"
        SYSCALL_GROUPING="adjtimex settimeofday"
    fi
    OTHER_FILTERS=""
    AUID_FILTERS=""
    KEY="audit_time_rules"
    # Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()

    # If audit tool is 'augenrules', then check if the audit rule is defined
    # If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
    # If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
    default_file="/etc/audit/rules.d/$KEY.rules"
    # As other_filters may include paths, lets use a different delimiter for it
    # The "F" script expression tells sed to print the filenames where the expressions matched
    readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
    # Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
    if [ ${#files_to_inspect[@]} -eq "0" ]
    then
        file_to_inspect="/etc/audit/rules.d/$KEY.rules"
        files_to_inspect=("$file_to_inspect")
        if [ ! -e "$file_to_inspect" ]
        then
            touch "$file_to_inspect"
            chmod 0600 "$file_to_inspect"
        fi
    fi

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod 0600 ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()


    # If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
    # file to the list of files to be inspected
    default_file="/etc/audit/audit.rules"
    files_to_inspect+=('/etc/audit/audit.rules' )

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod 0600 ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_time_adjtimex'

###############################################################################
# BEGIN fix (244 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_time_clock_settime'
###############################################################################
(>&2 echo "Remediating rule 244/252: 'xccdf_org.ssgproject.content_rule_audit_rules_time_clock_settime'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F a0=0x0"
	AUID_FILTERS=""
	SYSCALL="clock_settime"
	KEY="time-change"
	SYSCALL_GROUPING=""
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_time_clock_settime'

###############################################################################
# BEGIN fix (245 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_time_settimeofday'
###############################################################################
(>&2 echo "Remediating rule 245/252: 'xccdf_org.ssgproject.content_rule_audit_rules_time_settimeofday'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
    # Create expected audit group and audit rule form for particular system call & architecture
    if [ ${ARCH} = "b32" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
        # so append it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday stime"
        SYSCALL_GROUPING="adjtimex settimeofday stime"
    elif [ ${ARCH} = "b64" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
        # therefore don't add it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday"
        SYSCALL_GROUPING="adjtimex settimeofday"
    fi
    OTHER_FILTERS=""
    AUID_FILTERS=""
    KEY="audit_time_rules"
    # Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()

    # If audit tool is 'augenrules', then check if the audit rule is defined
    # If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
    # If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
    default_file="/etc/audit/rules.d/$KEY.rules"
    # As other_filters may include paths, lets use a different delimiter for it
    # The "F" script expression tells sed to print the filenames where the expressions matched
    readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
    # Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
    if [ ${#files_to_inspect[@]} -eq "0" ]
    then
        file_to_inspect="/etc/audit/rules.d/$KEY.rules"
        files_to_inspect=("$file_to_inspect")
        if [ ! -e "$file_to_inspect" ]
        then
            touch "$file_to_inspect"
            chmod 0600 "$file_to_inspect"
        fi
    fi

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod 0600 ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()


    # If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
    # file to the list of files to be inspected
    default_file="/etc/audit/audit.rules"
    files_to_inspect+=('/etc/audit/audit.rules' )

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod 0600 ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_time_settimeofday'

###############################################################################
# BEGIN fix (246 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_time_stime'
###############################################################################
(>&2 echo "Remediating rule 246/252: 'xccdf_org.ssgproject.content_rule_audit_rules_time_stime'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core && { ( ! ( ( grep -sqE "^.*\.aarch64$" /proc/sys/kernel/osrelease || grep -sqE "^aarch64$" /proc/sys/kernel/arch; ) ) && ! ( ( grep -sqE "^.*\.s390x$" /proc/sys/kernel/osrelease || grep -sqE "^s390x$" /proc/sys/kernel/arch; ) ) ); }; then

# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
    # Create expected audit group and audit rule form for particular system call & architecture
    if [ ${ARCH} = "b32" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
        # so append it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday stime"
        SYSCALL_GROUPING="adjtimex settimeofday stime"
    elif [ ${ARCH} = "b64" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
        # therefore don't add it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday"
        SYSCALL_GROUPING="adjtimex settimeofday"
    fi
    OTHER_FILTERS=""
    AUID_FILTERS=""
    KEY="audit_time_rules"
    # Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()

    # If audit tool is 'augenrules', then check if the audit rule is defined
    # If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
    # If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
    default_file="/etc/audit/rules.d/$KEY.rules"
    # As other_filters may include paths, lets use a different delimiter for it
    # The "F" script expression tells sed to print the filenames where the expressions matched
    readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
    # Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
    if [ ${#files_to_inspect[@]} -eq "0" ]
    then
        file_to_inspect="/etc/audit/rules.d/$KEY.rules"
        files_to_inspect=("$file_to_inspect")
        if [ ! -e "$file_to_inspect" ]
        then
            touch "$file_to_inspect"
            chmod 0600 "$file_to_inspect"
        fi
    fi

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod 0600 ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()


    # If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
    # file to the list of files to be inspected
    default_file="/etc/audit/audit.rules"
    files_to_inspect+=('/etc/audit/audit.rules' )

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod 0600 ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_time_stime'

###############################################################################
# BEGIN fix (247 / 252) for 'xccdf_org.ssgproject.content_rule_audit_rules_time_watch_localtime'
###############################################################################
(>&2 echo "Remediating rule 247/252: 'xccdf_org.ssgproject.content_rule_audit_rules_time_watch_localtime'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'






# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/localtime" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/localtime $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/localtime$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/localtime -p wa -k audit_time_rules" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_time_rules.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/localtime" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_time_rules.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_time_rules.rules"
    # If the audit_time_rules.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/localtime" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/localtime $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/localtime$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/localtime -p wa -k audit_time_rules" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_time_watch_localtime'

###############################################################################
# BEGIN fix (248 / 252) for 'xccdf_org.ssgproject.content_rule_auditd_audispd_syslog_plugin_activated'
###############################################################################
(>&2 echo "Remediating rule 248/252: 'xccdf_org.ssgproject.content_rule_auditd_audispd_syslog_plugin_activated'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

var_syslog_active="yes"

AUDISP_SYSLOGCONFIG=/etc/audit/plugins.d/syslog.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^active")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_syslog_active"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^active\\>" "$AUDISP_SYSLOGCONFIG"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^active\\>.*/$escaped_formatted_output/gi" "$AUDISP_SYSLOGCONFIG"
else
    if [[ -s "$AUDISP_SYSLOGCONFIG" ]] && [[ -n "$(tail -c 1 -- "$AUDISP_SYSLOGCONFIG" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "$AUDISP_SYSLOGCONFIG"
    fi
    cce="CCE-83695-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "$AUDISP_SYSLOGCONFIG" >> "$AUDISP_SYSLOGCONFIG"
    printf '%s\n' "$formatted_output" >> "$AUDISP_SYSLOGCONFIG"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_auditd_audispd_syslog_plugin_activated'

###############################################################################
# BEGIN fix (249 / 252) for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_admin_space_left_action'
###############################################################################
(>&2 echo "Remediating rule 249/252: 'xccdf_org.ssgproject.content_rule_auditd_data_retention_admin_space_left_action'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

var_auditd_admin_space_left_action='single'


var_auditd_admin_space_left_action="$(echo $var_auditd_admin_space_left_action | cut -d \| -f 1)"

AUDITCONFIG=/etc/audit/auditd.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^admin_space_left_action")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_auditd_admin_space_left_action"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^admin_space_left_action\\>" "$AUDITCONFIG"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^admin_space_left_action\\>.*/$escaped_formatted_output/gi" "$AUDITCONFIG"
else
    if [[ -s "$AUDITCONFIG" ]] && [[ -n "$(tail -c 1 -- "$AUDITCONFIG" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "$AUDITCONFIG"
    fi
    cce="CCE-83700-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "$AUDITCONFIG" >> "$AUDITCONFIG"
    printf '%s\n' "$formatted_output" >> "$AUDITCONFIG"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_admin_space_left_action'

###############################################################################
# BEGIN fix (250 / 252) for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_space_left'
###############################################################################
(>&2 echo "Remediating rule 250/252: 'xccdf_org.ssgproject.content_rule_auditd_data_retention_space_left'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

var_auditd_space_left='100'


grep -q "^space_left[[:space:]]*=.*$" /etc/audit/auditd.conf && \
  sed -i "s/^space_left[[:space:]]*=.*$/space_left = $var_auditd_space_left/g" /etc/audit/auditd.conf || \
  echo "space_left = $var_auditd_space_left" >> /etc/audit/auditd.conf

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_space_left'

###############################################################################
# BEGIN fix (251 / 252) for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_space_left_action'
###############################################################################
(>&2 echo "Remediating rule 251/252: 'xccdf_org.ssgproject.content_rule_auditd_data_retention_space_left_action'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

var_auditd_space_left_action='email'


var_auditd_space_left_action="$(echo $var_auditd_space_left_action | cut -d \| -f 1)"
#
# If space_left_action present in /etc/audit/auditd.conf, change value
# to var_auditd_space_left_action, else
# add "space_left_action = $var_auditd_space_left_action" to /etc/audit/auditd.conf
#

AUDITCONFIG=/etc/audit/auditd.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^space_left_action")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_auditd_space_left_action"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^space_left_action\\>" "$AUDITCONFIG"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^space_left_action\\>.*/$escaped_formatted_output/gi" "$AUDITCONFIG"
else
    if [[ -s "$AUDITCONFIG" ]] && [[ -n "$(tail -c 1 -- "$AUDITCONFIG" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "$AUDITCONFIG"
    fi
    cce="CCE-83703-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "$AUDITCONFIG" >> "$AUDITCONFIG"
    printf '%s\n' "$formatted_output" >> "$AUDITCONFIG"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_space_left_action'

###############################################################################
# BEGIN fix (252 / 252) for 'xccdf_org.ssgproject.content_rule_auditd_name_format'
###############################################################################
(>&2 echo "Remediating rule 252/252: 'xccdf_org.ssgproject.content_rule_auditd_name_format'"); (
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel-core; then

var_auditd_name_format='fqd'


var_auditd_name_format="$(echo $var_auditd_name_format | cut -d \| -f 1)"

if [ -e "/etc/audit/auditd.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*name_format\s*=\s*/Id" "/etc/audit/auditd.conf"
else
    touch "/etc/audit/auditd.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/audit/auditd.conf"

cp "/etc/audit/auditd.conf" "/etc/audit/auditd.conf.bak"
# Insert at the end of the file
printf '%s\n' "name_format = $var_auditd_name_format" >> "/etc/audit/auditd.conf"
# Clean up after ourselves.
rm "/etc/audit/auditd.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

) # END fix for 'xccdf_org.ssgproject.content_rule_auditd_name_format'